1602 162 16X2 16*2 Character LCD Module Display Screen Panel LCM Blue White

1602 162 16X2 16*2 Character LCD Module Display Screen Panel LCM Blue WhiteBlue Screen withwhite characters
1.Brand new and high quality.
2.LCD display module with blue blacklight.
3.Wide viewing angle and high contrast.
4.Built-in industry standard HD44780 equivalent LCD controller.
5.Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices.
6.LCM type: Characters
7.Can display 2-lines X 16-characters.
8.Operate with 5V DC.
9.Module dimension: 80mm x 35mm x 11mm.
10.Viewing area size: 64.5mm x 16mm.

Package Included:1 x LCD Display ModuleGreen Screen withBlack characters
Brand new and high quality.
LCD display module with Yellow blacklight.
Wide viewing angle and high contrast.
Built-in industry standard HD44780 equivalent LCD controller.
Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices.
LCM type: Characters
Can display 2-lines X 16-characters.
Operate with 5V DC.
Module dimension: 80mm x 35mm x 11mm.
Viewing area size: 64.5mm x 16mm

Package Content:1PCS x 1602LCD Display Module.White screen withBlack characters
Features:
1. Made of high quality material, durable and practical.
2. Wide temperature glass for clearer display.
3. Fully automatic electroplating line, environmentally friendly materials, uniform electroplating, good corrosion resistance.
4. AIP31066 or SPLC780D controller (COB process).
5. Standard 1x16 pin interface, widely used.Parameter:
Product Model: LCM1602A
Dimensions: 80.0mmX36.0mm
Display content: 16 characters X2 lines
Interface mode: single row parallel port
Working voltage: 5V
Controller: SPLC780D
LCD operating temperature: -20℃~70℃
LCD storage function: -30℃~80℃
Wide temperature LCD: -30℃~80℃Precautions:
Liquid crystal displays are made of glass, organic sealants, organic fluids, and polymer-based polarizers. When handling, pay attention to the following:
1. Keep the temperature within the range of use and storage. Excessive temperature and humidity can cause polarization degradation, polarizer peeling, or air bubbles.
2. Do not touch the exposed polarizer with anything harder than HB pencil lead. Remove the dust from the surface of the monitor, gently use cotton
To wipe, soak a deerskin towel or other soft material in cleaning oil.
3. Immediately wipe off saliva or water droplets. Excessive contact time of ITO with water will cause deformation or discoloration of the surface of the liquid crystal display.
4. Glass is easily broken due to rough handling. Especially in corners and edges.
5. Do not drive the LCD with DC voltage.Welding:
1. Solder to I/O terminals only.
2. Only use a soldering iron that is properly grounded and has no leakage.
3. Soldering temperature: 280℃±10℃
4. Welding time: 3 to 4 seconds.
5. Low temperature solder filled with resin flux.
6. If flux is used, the LCD surface should be covered to avoid flux spattering. Flux residues should be removed after shielding.Operate:
1. The viewing angle can be adjusted by changing the LCD driving voltage V0.
2. The driving voltage should be kept within the specified range. Excessive voltage will shorten the life of the display.
3. The response time increases with decreasing temperature.
4. At temperatures above its operating range, the display may turn black or dark blue; this (but do not press
domain) may cause some display segments to \"break\".
5. Mechanical damage during operation (such as pressing the display area) may cause the line segment to \"break\".Package list:
1x LCM1602A LCD screenIIC/I2C interface LCD1602 adapter boardProduct selling point:
1. Power supply voltage: 5V
2. Support I2C protocol
3. With backlight, and contrast adjustment potentiometer
4.4 line output is simpler
5.IIC bus address: 0x27Product parameters:
IIC/I2C interface LCD1602 adapter board without LCD screen
There are only 20 IO ports on the control board. If you add some sensors, SD cards, etc., there are many modules such as relays, and the IO ports are not enough.
The original 1602 screen needs 7 IO ports to drive, this module we developed can help you save 5 IO ports, we send the function libraryPackage List:
LCD1602 LCD screen adapter board*1

Payment must be received in 5 business days of sale closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping

1. We only ship to the confirmed address provided by . please make sure your address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can\'t take a refund.

Refund

• If you can\'t receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
  We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.

• If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
• If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.