16-channel Relay Control Panel PLC 5V Module For Arduino

Features:
Using high-current relay , AC250V 10A DC30V 10A
Contact some independent wiring , safe and reliable
Standard interface , can be extended in a variety of development board
With fixed screw holes for easy installation
Suitable for a variety of platforms such as 51/AVR/AVR/ARMModule Description :
1 , the module complies with international safety standards , the load control area and regional isolation tank ;
2, using double-sided FR-4 circuit board design, high-end chip production process;
3, using loose music authentic relay control;
4, with the relay instructions , pull off, disconnect does not shine;
5, the signal input has a low signal , often beginning with a common terminal will be turned on;
6 , the relay can control the various devices and the load;
7 , 16 and 16 normally open normally closed contact;
8 , blue KF301 terminals to the control line is more convenient.
9 , Module size : 138m * 56mm * 18.5mm ( L * W * H ) , Weight : 120g
10 with 4 fixing bolt holes , hole 3.1mm, pitch 131mm * 49.5mm
11 , finished by 100% functional testing and stability testing
Two module interface :
1, VCC: 5V power supply connected to the positive
2, GND: 5V power supply connected to the negative
3, IN1-IN8: trigger signal , active low
Relay outputs : a 12- line interface, the interface can be directly connected to all leads , user-friendly
1, NO1 - NO8: normally open relay interfaces , relay before the vacant after the pull shorted with COM
2, COM1 - COM8 Relay Common Interface
3, NC1 - NC8: normally closed relay interface relay shorted with COM ago , after the pull- vacantLow Level 5V solid state relay:
Product description:
1. Omron 5V solid state relay 240V 2A, the output with a resistive fuse 240V 2A.
2. size:
1 way: 25 * 34 * 25 (long * wide * high)
2 way: 55 * 33 * 25 (long * wide * high)
4 way: 57 * 55 * 25 (long * wide * high)
8 Way: 106 * 56 * 25 (L * W * H)
3. input power: 5V DC (160MA)
4. the input control signal voltage:
High level module: (0-2.5V state low level relay ON)
(3.3-5V state high level relay OFF)
Low level module: (0-2.5V state low level relay OFF)
(3.3-5V state high level relay ON)
5. there are 2.54CM pin and blue KF301 terminal control line is more convenient.
Input section:
DC +: Connect the power supply positive (according to the relay voltage)
DC-: Connect the power supply negative
CH1: 1 relay module signal trigger terminal (low level trigger active)
CH2: 2 relay module signal trigger terminal (low level trigger active)
CH3: 2 relay module signal trigger terminal (low level trigger active)
CH4: 2 relay module signal trigger terminal (low level trigger active)
High and low meaning:
High-level trigger refers to the signal trigger side (IN) and the negative power supply has a positive voltage between the positive and the power supply is usually connected to the trigger side of a trigger, when the trigger side voltage or trigger to reach the trigger Voltage, the relay is pull.
Low-level trigger refers to the voltage between the signal trigger terminal and the negative terminal of the power supply is OV, or the voltage of the trigger terminal is lower than the voltage of the positive terminal of the power supply. When the voltage is low enough to trigger, the relay is pulled in, The negative side of the power supply is connected to the trigger side of a trigger, so that the relay is pull.Electrical parameters:
Voltage Version Quiescent Current Operating Current Trigger Voltage Trigger Current
1 channel 5V 0mA 12.5mA 0-2.5V 2mA
2 5V 0mA 22.5mA 0-2.5V 2mA
4 5V 0mA 48mA 0-2.5V 2mA
4 5V 0mA 102mA 0-2.5V 2mAproduct manual:1. Module power supply: the power must be DC, the voltage and the relay voltage to match
2. Wiring method:
When the trigger side of the signal trigger level, the relay will be connected, the device has electricity and workPrecautions:
1. Module power supply: power must be DC, 5V power supply
2. Module control terminal voltage: This module can only be used to control the AC current, can not control the DC current.ContactUs

(1) Westrive to provide the best service as possible, commit to resolve all problemsand give fast shipping.
(2) Please contact us before giving anynegative response. If you have any questions, please do not hesitate tocontact us.

Payment
(1) All paymentsmust be prepaid and cleared.
(2) We only accept Paypal payment. Aftercheckout, please make through Paypalservice.

Shipping

(1) Buyer is responsible for anyincorrect address and undeliverable address. We reserve the right to charge the shipping fee again for returned items due to
wrong address.We take the paypal address as your shipping address.Please make sure your shipping address is correct during checkout.
(2)Your order will be shippedwithin 24 hours after payment is cleared(Sat. & Sun.excluded and holidays)
(3) We ship orders using USPS (United StatesPostal Service). The shipment usually takes 2-4 business days, excludingholidays, Saturday and Sunday
(4) Local pick up is notavailable.
(5) No This product has a 30-daywarranty.
(2) Warranty does not extended to any products that arebuyer\'s negligence, abuse, misuse, improper installation or physicallydamaged on the buyer or user\'s part.
(3) Please contact us before making areplacement or refund.
(4) In case of returning, buyer must pay their ownpostage and shipping fees for replacement or refund. We will providereplacement or refund after product is received.