►Using DDS direct digital synthesis technology to generate precise, stable, low distortion output signal.
►CH1 and CH2 completely symmetrical two channels, each channel can be independently set the parameters.
►Supports user-defined waveform, each arbitrary waveform memory depth 2048*12bits, 200MSa/s sampling rate.
►With pulse trains burst output function,allow the unit to any output 1~1048575 arbitrary pulse trains.
►Measurement functions: 60MHz frequency meter and counter function.
►Signal output amplitude range is 5mVpp- 20Vpp, DC offset adjustment range is -120% to +120%, the resolution is 1%.
►Digital signal output function, CMOS output range 0~10V.
►Waveform generator up to 12 bits wide, the output waveform is more delicate, waveform distortion is low.
►With full CNC functions, display and adjust of current output signal parameters, such as the amplitude, offset, frequency, duty cycle, and the phase difference of two signals.
►After connected with computer, user can control signal generator functions and parameters, and can edit and download arbitrary waveform.
►High frequency accuracy and resolution: frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 0.01Hz.
►Tracking function: built-in frequency, amplitude, offset, duty cycle, waveform and other parameters follow function, easy to use.
►Scanning features: frequency linear sweep and logarithmic sweep function, start and end points of scanning can be set freely.
►Storage features: can store 16 groups parameters set by the user.
►Operation: key operation, LCD1602 display in English, directly digital setting parameters or continuous adjustment knob.
►Input over-voltage protection:DC5V power supply, insert more than 5V voltage will not damage the machine.
►Output short-circuit protection: all signal output can work above 60s in load short-circuit situation.
-->
Model selection
MHS-5206A
MHS-5212A
MHS-5220A
MHS-5225A
Sine wave frequency range
0~6MHz
0~12MHz
0~20MHz
0~25MHz
Square wave frequency range
0~6MHz
Pulse wave frequency range
0~6MHz
TTL / COMS digital signal frequency range
0~6MHz
Arbitrary / other waveform frequency range
0~6MHz
Frequency characteristics
Frequency minimum resolution
10mHz
Frequency error
±5x10-6
Frequency stability
±1X10-6/5 hours
Arbitrary / other waveform
50Ω±10%
Amplitude characteristic
Amplitude range (peak-to-peak value)
5mVp-p~20Vp-p
Amplitude resolution
1mVp-p (-20db attenuation) 10mVp-p(No attenuation)
Amplitude stability
±0.5%(Each 5 hours)
Amplitude error
Offset range
-120%~+120%
Offset resolution
1%
Relative range
0~359°
Phase resolution
1°
Waveform characteristics
Waveform type
Sine、Square、pulse (adjustable duty cycle, precise adjustment of pulse width and period), triangular wave, partial sine wave, CMOS wave, DC level (set DC amplitude by adjusting offset), half wave, full Wave, positive staircase wave, anti-ladder wave, noise wave, exponential rise, exponential drop, Symplectic pulse and Lorenz pulse and 60 arbitrary wave forms
Wave length
2048 points
Waveform sampling rate
200MSa/s
Waveform vertical resolution
12 bits
Sine wave
Harmonic Suppression
Total harmonic distortion
<0.8%(20Hz~20kHz)
Square wave
Rise and fall time
≤20ns
Overshoot
≤10%
Duty cycle adjustment range
0.1%-99.9%
TTL signal
Output level
≥3Vpp
Fan-outcoefficient
≥20TTL
Rise and fall time
≤20ns
COMS signal
Low level
<0.3V
High level
1V~10V
Rise and fall time
≤20ns
Saw toothwave
Duty cycle>50%
Saw tooth wave
Duty cycle<50%
Saw tooth wave
Arbitrary wave
Quantity
16 groups
Storage depth / group
1KB / 16 groups
Waveform output
Frequency measurement range
GATE-TIME=10S 0.1HZ-60MHZ
GATE-TIME=1S 1HZ-60MHZ
GATE-TIME=0.1S 10HZ-60MHZ
GATE-TIME=0.01S 100HZ-60MHZ
Input voltage range
0.5Vp-p~20Vp-p
Counting range
0~4294967295
Counting method
Manual
Positive and negative pulse width measurement
10ns resolution, maximum measurement 10s
Period measurement
20ns resolution, maximum measurement 20s
Duty cycle measurement
0.1% resolution, measuring range 0.1% ~ 99.9%
Source selection
1. EXT.IN input (AC signal)
2. TTL_IN input (digital signal)
Communication characteristics
Interface method
Use USB to serial interface
Communication rate
57600bps
Protocol
Using the command line, the agreement is open
Other
Power supply
DC 5V±0.5V
Dimension
180*190*72mm
Net weight
550g(Host) 480g(Annex)
Gross weight
1090g
Working environment
Temperature:-10℃~50℃ Humidity<80
1. MHS-5200A Signal Generator*1
2.Power 3. TTL Expansion Board
4.USB Data Cable*1 5. Q9 Clip Line*2
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.