Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

1200W 6000CFM Fog Machine Smoke Machine 6 LED Remote Control RGB Fog Machine

1200W 6000CFM Fog Machine Smoke Machine 6 LED Remote Control RGB Fog Machine
$58.99

Buy Now

1200W FOG MACHINERGB6pcs three-in-one high-power lamp beads APPLICABLE OCCASIONSTEPS FOR USEPLEASE NOTE!!!
  • Ensure sufficient atomized liquid in tank before use. Metal nozzle must be fully immersed.
  • DO NOT spray directly on people. Keep away from heat sources (fireplaces, radiators).
  • During heating, machine temperature rises rapidly. Stay away and DO NOT TOUCH the body.
  • For continuous spray: A. Wired: Keep pressing the red button; B. Wireless: Press unlock button once. Sprays for ~20 seconds, then reheats.
Common issues that can often be resolved with some simple troubleshooting steps1.Clean the heater block:- Mix equal parts distilled water and white vinegar; - Run this solution through the machine for 2-3 minutes; - Follow with clean fog fluid for 2-3 minutes2. Check for clogs:- Make sure the fluid line isn\'t pinched or blocked; - Verify the fluid tank cap is allowing proper air flow; - Ensure the fluid pickup tube is properly seated in the tank;3. Prime the pump:- Disconnect and reconnect the fluid line; - Hold down the fog button for 30-45 seconds; - You may need to repeat this a few timesImportant:Always use quality fog fluid and never run the machine dry, as this can damage the heating element.More advanced solutionsIf these steps don\'t resolve the issue, here are more advanced solutions to try:4. Deep Cleaning Process:- Unplug the machine and let it cool completely; - Remove the nozzle (if possible) and soak it in 99% isopropyl alcohol for 30 minutes; - Use a small brush to gently clean the nozzle opening; - Dry thoroughly before reinstalling;5. Check Electrical Component:- Verify the heating indicator light is working; - Listen for the pump sound when activated; - Feel if the machine is getting warm (while plugged in); - Check if the fuse needs replacement (if applicable);6. Test Pump Function:- Remove fluid bottle;- Gently blow air through the fluid line to check for blockages;- Listen for unusual pump sounds (grinding, clicking, or silence); - Check if fluid is returning to the tank via return line;7. Reset Procedure:- Unplug the machine for 30 minutes; - Plug in and heat up without fluid for 5 minutes; - Connect fluid line and try againConsider a replacement unitIf none of these steps resolve the issue,you may need professional repair service or consider a replacement unit. Specifications:New model: ZQ10016Color: SilverMaterial: aluminum alloyInput voltage: AC110V/220V50/60HZ (according to the region)Rated power: 1200WLamp beads: 6PCS three-in-one high-power lamp beadsControl protocol: 433MHzEffective control distance: about 15 metersControl mode: wireless remote controlHeating time: about 2-3 minutes for the first heating, and about 20 seconds for the subsequent heating cycle.Smoke spraying time: about 25 secondsSpraying distance: 4-5 metersCapacity: 1L (can continue to smoke for about 60 minutes)Smoke spray rate: 160m³ / MinProtection grade: IP30Working environment: -10℃-45℃Applicable occasion: ballroom, KTV, party, house decoration light, etc. Widely used in different occasions, such as stage, wedding ceremony,etc to create a romantic and gorgeous ambience.

Precautions:

1. The hood must be placed in a ventilated place; do not place it in the hole during use; otherwise, the temperature of the hood will become too high, and then the hood will not be able to heat due to the cut off of the temperature control fuse.

2. The ventilator can be placed on the ground or installed at high altitude, parallel to the ground, but not tilted; make sure to leave enough space for heat dissipation around the ventilator, at least 30 cm.

3. Please put this product out of the reach of children, away from flammable and explosive items; away from the smoke machine 40 cm to avoid burns.

4. All smoking machines will emit a small amount of smoke (some even have a slight burning smell) during the heating process, which is normal.

5. If the following conditions occur, such as the reduction of smoke, the noise of the suction pump is loud or the smoke cannot be sprayed, please immediately turn off the power. At the same time, check the inventory of liquid smoke, fuses, cables and power plugs. If the problem cannot be solved, please contact your dealer.

Packing List:

1. Smoke machine *1/2/4

2. Power cord *1/2/4

3. Remote control *1/2/4

4. Handle *1/2/4


On Jan 16, 2025 at 09:02:15 PST, seller added the following information: On Sep 5, 2025 at 01:57:34 PDT, seller added the following information: On Dec 4, 2025 at 02:24:39 PST, seller added the following information:

On Apr 14, 2026 at 03:46:11 PDT, seller added the following information:

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design