TEGO ROOFING SUPPLY
St. Charles, MO 63301
Over 30 years experience in single ply flatroofing products!\"
This 12\' x 20\' 45 Mil EPDM blackrubber roofing with AdhesiveFree shipping in the continental US
·1Cleanthe roof surface of all debris and nails. Re-fasten any loose roof boards.
·2Fillany gaps larger than 3/8” inch with wooden strips. The EPDM cannot span gaps ofmore than 3/8\" without risk of possible adhesion issues.
·3Startat the bottom of the roof and roll out the EPDM from one side of the roof tothe other and let it sit for 10-15 minutes. Fold bottom half of the membraneonto the top half of the in place membrane.
·4Applythe bonding adhesive to the exposed roof deck and NOT to the EPDM membrane asthe adhesive is to be applied as a one surface WET LAMINATE using a notchedtrowel to spread the adhesive in a pattern over the decking. Slowly fold theEPDM roofing membrane back into place while the adhesive is still wet. Toensure adhesive transfer and a good bond, use a stiff bristled push broom andforce the membrane into contact with the adhesive on the roof deck. Repeat theprocess on the other half of the EPDM membrane.
We have both WHITE and BLACK EPDM rubber roofing.
EPDM is extremely flexible, much like a tire innertube, and extremely strong. EPDM has over 350% elongation, and it\'s performance characteristics are stable in temperature ranges from -50 to 240 degrees Fahrenheit before failure. The EPDM membrane also exhibits over 1,300 lbs psi tensile strength, and 150 psi tear strength. Though there are other types of roofing membrane material in the marketplace today, none of them meet all the positive characteristics, ease of handling, and price of EPDM. FORMULATION COLOR SPECIAL APPROVALS ANJ45B & ANJ60B MIL EPDM BLACK UL CLASS A
FM CLASS 1 ANJ60W 60 MIL EPDM WHITE UL CLASS A
FM CLASS 1 PHYSICAL PROPERTIES ASTM TEST METHOD RESULTS WIDTH, INCHES D751 -0 / +2.0 LENGTH, INCHES D751 -0 / +6.0 THICKNESS, INCHES D751 +10% TENSIL STRENGTH, MIN PSI D412 D1E C 1305 ELONGATION, ULTIMATE MIN. % D412 300 TEAR RESISTANCE, MIN., LBS./INCH D624 DIE C 150 LINEAR DIMENSIONAL CHANGE,
MAX.. % (168 HOURS AT 2400 DEGREES F) D1204 +2 BRITTLENESS POINT AT -49 DEGREES F D2137 DOES NOT BREAK OZONE RESISTANCE (168 HOURS / 100
PPHM/1040 F/400 C/505 EXT.) D1149 NO CRACKS AT 7X MAGNIFICATION WATER ABSORBSION, MAX. %
(168 HOURS AT 15 DEGREES F/70 C) D471 +8 / -2.0 HEAT AGING (28 DAYS AT 240 DEGREES F) PIN HOLES NO HOLES, COMETS, OR FISH EYES MORE
THAN 1/3 DEPTH OF TOTAL THICKNESS SEAMS 2\" MIN. OVERLAP SEAM PEEL STRENGTH
2 INCH / MIN. CROSSHEAD SPEED 15 PLI MIN. SEAM SHEAR STRENGTH
2 INCH / MIN. CROSSHEAD SPEED (BREAK MUST BE MEMBRANE NOT SEAM 30 PLI MIN.) Summary of Our Selling Policies Shipping US and International Delivery 24-48 hours TO SHIP NORMALLY on in stock items, not counting weekends or holidays Refunds & Returns Returns accepted on qualified items with RGA return number
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.