Intelligent CNC Underpinner V-nailer Corner Nailing Machine 110V Product Overview The CNC underpinner is designed for 90-degree miter joint assembly of wooden and plastic photo frames. It delivers excellent right-angle joint quality and fast assembling speed. It operates with the driving compressed-air pressure of 0.6-0.8MPa and rated voltage of 110V. It is the optimal choice for products with strict requirements for nailing position and nail spacing, and is widely adopted in high-volume and high-standard photo frame production.
Note: There is no air compressor in the packing list. Customers should use their own air compressors.
Product Parameters Working voltage 110V Air pressure 6-8kg/cm² (90-120psi) V-shaped nail L5/7/10/12/15mm x W10mm Stapling angle 90˚, 120˚, 135˚ Maximum width 13cm (5.12in) Maximum thickness 10cm (3.94in) Available corner nail models 5mm, 7mm, 10mm, 12mm, 15mm
Precaution 1. Ensure the nail die is matched with the specifications of the corner nails.
2. Non-professionals cannot operate or maintain the machine.
3. Do not put your hands under the hammer during operation.
4. Do not touch the moving parts during operation.
Product Features 1. Intelligent control: The machine allows flexible setting of nailing quantity, nail position and nail spacing. Multiple groups of process parameters can be saved and recalled. Real-time data are displayed on the screen for easy commissioning, and new operators can master it easily.
2. Stable clamping effect: The clamping plates and extended support arm deliver stable holding for large-sized frame mouldings. Precise miter positioning minimizes joint gap and dislocation for firm and neat frame corners.
3. Sturdy structure: The worktable is wear-resistant and rust-proof, and has a longer service life.
4. Good compatibility: Adjustable positioning stops support various frame mouldings and 90°/120°/135° corner joining.
5. Efficient stapling performance: The stable pneumatic nailing mechanism ensures consistent nailing force. It is compatible with V-nails of 5/7/10/12/15mm, and suitable for various frame strips.
6. Available single-person operation: The fast working speed and consistent nailing quality reduce the defective rate, and it is ideal for mass production in frame workshops, galleries and photo studios.
Control Panel
The CNC control panel is equipped with an LCD screen and control keys. It allows flexible setting of different technological parameters. It ensures intuitive operation with low learning threshold, guaranteeing stable and precise nailing performance for mass production.
Pressure Regulating Assembly
The dual independent pressure regulating valves together with the pressure gauge are designed for separately adjusting the clamping pressure and nailing pressure according to wood hardness and molding thickness. The user‑friendly knobs deliver sensitive pressure response.
Clamping Mechanism
The precision pneumatic clamping mechanism ensures stable clamping without deformation. Multiple adjustable components can adapt quickly to frame moldings of various widths and thicknesses. It delivers high repeat positioning accuracy and consistent corner quality.
Air Source Filter
The air source treatment two-unit filter combines pressure regulation, air filtration and mist lubrication. It filters moisture and impurities from compressed air and reduces wear of cylinders and valves. The pressure gauge monitors the air pressure in real time.
Storage Tank
The storage tank can effectively offset pressure fluctuation from the external air compressor and guarantee sufficient stable air pressure during clamping and nailing. It features good air‑tightness and adequate storage capacity to avoid unstable nailing force.
Foot Switches
The dual foot pedals with protective covers can effectively prevent accidental triggering. One pedal for clamping and the other for nailing can liberate both hands for positioning frame moldings and achieve clear tactile response and fast response for effortless operation.
Operation Method
1. Connect the compressed air supply and power supply. Lift the corner pressing lever and place the frame moulding in position. Adjust the height of the corner pressing component and the moulding. Loosen the adjustable handle, move the fixed block to adjust the front-rear position. Loosen the positioning screw of the fixed block to adjust the vertical position. The setting depends on the profile of the moulding; the height difference between the corner pressing component and the moulding shall be about 1cm.
2. Check the thimble height at the nail outlet. Normally the thimble shall protrude 0.5-1 mm above the panel. Fine-tune accordingly for different materials. The nailing cylinder aligns with the bottom of the frame corner. It is a stroke-adjustable cylinder. Rotate the nut under the nailing cylinder left and right to adjust the thimble height until it reaches the ideal working position.
3. Pull up and turn the pressure regulating valve, watch the pressure gauge, and adjust air pressure to 0.6MPa or higher. At this moment, the corner pressing lever stays at the upper position.
4. Place one side of the moulding first. Put the mitered frame corner between the 90-degree positioning adjustment blocks. Set the nailing quantity and nailing positions. Verify that the frame cut surface aligns with half-height of the V-nail and confirm the position of the first nail is accurate.
5. Open the manual valve and check that the nail feeder can move back and forth. Move the nail feeder to the rear-end position, and load the corner V‑nails. (Make sure the adhesive side of corner nails faces upward and nail tips point forward.) After loading the corner nails, close the manual valve to ensure the nail feeder can hold the corner nails securely.
Product Display Item Included (024007): 1 x Intelligent CNC Underpinner 110V
You can make order with no worry.
Any concern just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months\' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
On Oct 8, 2026 at 01:13:37 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.