110V Desktop Semi-automatic Servo Capping Machine 200W Touchscreen Round Caps Capper
This is a desktop integrated servo capping machine, with the control cabinet and the capping actuator base integrated into one unit. It can be placed directly on a workbench without the need for foundation work. The machine is driven by a servo motor and controlled via a touchscreen interface, and uses pneumatic action to position and clamp bottles securely. It is compatible with a wide range of bottle caps and bottle types, making it suitable for various capping applications.
Applicable caps: Plastic caps, screw caps, pump head caps, spray caps, anti-theft caps (primarily round caps)
Applicable bottles: PET bottles, glass bottles, plastic bottles, small metal bottles
Parameters:
Voltage: 110V/60Hz
Servo power: capping servo 200W
Torque adjustment range: 0.1~10 N・m (touch screen digital adjustable)
Capping speed: 50~1200 r/min(adjustable)
Capping travel: 0~150 mm (composite travel of cylinder + servo lift)
Torque accuracy: ± 0.05 N·m, anti-slip teeth, prevent unscrewing the bottle cap
Bottle cap diameter: 18~37mm (for other sizes, please contact us for custom cap fixtures, covering 1~60mm)
Bottle height: 30~200 mm
Bottle body diameter: 15~80 mm
Capacity efficiency: 120~280 bottles / hour (floating according to the tightness of the bottle cap and the speed of manual bottle placement)
Gas source pressure: 0.5~0.7 MPa
Air consumption: 0.12 m3/min
Important Notice: This machine requires an air compressor for operation. It is not included with the machine and must be prepared by the customer!!
Features:
1. Servo Drive
The machine is servo-driven. Torque can be digitally adjusted via the touchscreen, with anti-slip and anti-cap-damage protection.
2. Multiple Capping Modes
Supports three capping modes: torque stop, rotation stop, and height stop, suitable for different process requirements.
3. Wide Adaptability
Compatible with various bottle cap and bottle sizes. Different products can be quickly switched by changing the fixture.
4. Audio-Visual Alarm System
Provides audible and visual alarms for various faults including torque overload, missing cap, servo error, and insufficient air pressure.
5. Pneumatic Automatic Centering Clamping
Dual-cylinder side positioning for automatic centering and clamping of the bottle body, with anti-rotation and anti-slip features.
6. Complete Operating Modes
Offers three operating modes: single-cycle test, automatic operation, and manual debugging, facilitating easy setup and maintenance.
Details:
Machine Structure Diagram:
1: touchscreen
2: Height adjustment handwheel
3: Adjusting cylinder forming hand wheel
4: Sealing servo motor
5: Capsule capping cylinder
6: Capping head
7: Cylinder for holding bottles
8: Emergency stop switch
9: Start button
10: Power switch
11: barometer
Operation Method:
1.Pre-startup Preparation
Power on: Connect to 110V power supply, press the power switch to power on the machine and enter the overall operation interface.
Connect air source: After connecting the air compressor, open the valve and adjust the machine pressure to 0.5~0.7 MPa. Confirm there is no air leakage in the pipeline.
2.Parameter Setting
Set capping parameters: Set the capping torque, capping speed, and delay parameters on the touchscreen.
3.Mechanical Adjustment
Adjust capping height: Rotate the lifting handwheel according to the cap height to position the capping head at the appropriate capping position.
Adjust down-press stroke: Adjust the stroke of the down-press cylinder. The shorter the stroke, the faster the capping speed. Operate in conjunction with the touchscreen parameters.
Adjust fixture: Adjust the side positioning fixture according to the bottle body diameter to ensure automatic centering and clamping of the bottle body, with anti-rotation and anti-slip features.
4.Trial Run
Manual debugging: Switch to manual mode and test the actions of the capping motor, bottle-holding cylinder, clamping cylinder, and lifting cylinder individually to confirm normal operation.
Single-cycle test: Place a sample bottle, click \"Single Cycle\" to perform one test capping. Check the cap tightness and positioning accuracy, and fine-tune the torque and stroke as needed.
5.Automatic Operation
Set output: If batch production is required, set the batch output on the touchscreen. The machine will automatically stop when the set quantity is reached.
Start production: After confirming the debugging is correct, switch to automatic mode and press the \"Run\" button. The machine will start continuous automatic capping.
6.Shutdown
Stop operation: Press the \"Stop\" button to stop the machine.
Turn off power and air source: Turn off the power switch, cut off the 110V power supply, then close the main air source valve and release residual pressure in the pipeline.
7.Emergency
In case of abnormality during operation, immediately press the emergency stop switch to shut down the machine. After troubleshooting, rotate and reset the emergency stop button before restarting.
Precaution:
1. During equipment operation, do not put your hands into the capping head and fixture clamping area to prevent crush injuries.
2. Tighten all screws regularly to prevent loosening and offset caused by long-term vibration; lubricate the lead screw and guide rail on a regular basis, and do not over-oil to avoid contaminating the products.
Item Included:
110V Semi-automatic servo capping machine (160028)
Shipping & Handling Details
Default Shipping Cost or Free Shipping Information:
▲Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS orthe UPS Ground. Customers from other areas or needs other shipping ways, please contact us.
▲Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas,therewill be extra shipping costs, please contact us for more detailed information.
▲Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.
Handling Time:Shipping is usually made in 1-3 business days after payments cleared. Orders are processed fromMonday-Friday; Not on the weekends & public holidays.
Sales tax / Customs duties:Any sales taxes or Customs duties are not included. If came out, theymust be undertaken by the buyer.
Damage In Shipping:Email or call us First! We will work with you to get the case resolved in the fastest method.
Return / Refund
If you are not 100% happy with your purchase, please contact Us. Please don\'t directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲Returns that are the result of our seller\'s error: Buyer will receive a full refund of the item as well as shipping charges
▲Allreturns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.
Defective & Damaged Products ▲If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it\'s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.
Warranty & response
▲6months\' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲Any warranty shipping cost to us is responsible by buyer.
▲Any shipping cost to buyer is responsible by the seller.
▲We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it\'s very important for us. Thanks very much.
On Sep 30, 2026 at 00:24:06 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.