110V Automatic Desktop Chain Conveyor Table Capping Machine Φ2.63"-4" Bottle Cap

新建网页 1

110V Automatic desktop conveyor capping machine

The design of the machine is novel and unique, and the operation and adjustment are very convenient. The operator only needs to put the bottle cap on the bottle mouth. The bottle cap is automatically tightened by the cap rubbing wheel during the bottle moving forward.

It can be used for both stand-alone production and online production.

　

Notice:We only sell machines, do not match air compressors,customers need to buy their own and the air pressure should reach 0.6MPa to work normally. Please ensure the air pressure of the air pump when working.

Product parameter:

　

　

Voltage: 110V/60Hz Material: Stainless steel surface Linear speed of conveyor belt: 0-0.7m/min Production speed: 20~60bot/min Capping torque： 3~8N.m Product size(Exterior sizes): 23.6\"x21.65\"x44.5\" (60x55x113cm) Bottle height： 50~190mm Bottle diameter： 30~100mm Adaptive bottle cap diameter： 60~100mm Applicable pressure (Mpa): ≥0.6

　

Feature:

　

The height adjustment handwheel of the capping machine can adjust the appropriate height of the capping machine according to the height of the bottle.

The working height can be adjusted by the black handle, which is simple and convenient. One machine can adjust various heights.

This machine adopts high-quality motor with stable performance.

The bottle separation sensing optical fiber is used for bottle separation. When a bottle is detected, the bottle separator baffle will block the remaining bottles until the first bottle completes the capping, and work in turn.

Intelligent touch operation panel, intuitive data, simple operation, and can adjust parameters at any time as required.

Customers can adjust the distance between guardrails according to the diameter of the bottle.

Customers can adjust the conveying speed of the conveyor belt according to their own needs

The machine is equipped with an emergency stop switch, which can stop all work with one click in case of any emergency.

The barometer and the air inlet, the air inlet is connected with the air compressor, easy to operate, stable performance.

Customers can adjust the position of the optical fiber by adjusting these screws, which has a wider range of applications.

This machine is equipped with a fiber optic amplifier, which can be adjusted by adjusting the fiber optic amplifier when the photosensitive eye cannot sense the product well.

The grinding wheel head can be replaced. If the grinding wheel head wears out after a period of use, this accessory can be replaced (you can purchase this accessory from us).

Chain conveyor belt. It can automatically transport products, saving time and labor.

Product analysis:

1.Conveyor belt

2.Fiber amplifier

3.Touchable display

4.power switch

5.Start switch

6.Emergency stop switch

7.Conveyor speed controller

8.Bottle holder

9.Adjusting cylinder of cover rubbing wheel

10.Gantry frame of capping machine

11.Height adjusting handwheel of capping machine

12.Capping machine

13.Guard adjuster

14.guardrail

15.Conveyor beltmotor

16.Cover rubbing wheel

17.Gland head

18.Bottle divider

　

Product safety precautions:

　

To ensure safe production, please read the following precautions carefully:

1. Use a power supply and air source that conforms to the requirements of this machine . The stability of the air source must be maintained under continuous working conditions.

2. After the power switch is turned off, there is still voltage in some circuits in the electrical control of this machine. When repairing the control circuit, please be sure to unplug the power cord.

3. Do not put your hands on the capping wheel and the capping head when working, and pay attention to personal safety.

4.When there is a problem with the machine, press the emergency stop button directly to suspend all work.

Advantages:

　

1. This machine has an intelligent touchable operation screen, which is more convenient and fast for processing work.

2. One touch operation, convenient and simple.

3. The bottles stacked on the conveyor belt can be separated one by one, without artificial deliberate placement, saving manpower.

4. Belt conveyor belt. It can automatically transport products, saving time and labor.

5. Imported motor, lasting and durable, strong power.

6. The rotating bottle height is adjustable, and the application range is wider.

　

　 Item number : 160383

Automatic desktop conveyor capping machine*1

Accessory box*1

You can make order with no worry.
Any concerns just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months\' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.

On Apr 23, 2025 at 22:59:24 PDT, seller added the following information: