TECHTONGDA® Stainless Steel Two‑layer Linear Vibrating Screen – Technical Documentation TECHTONGDA® Stainless Steel Two‑layer Linear Vibrating Screen 110V Product Overview
The stainless steel linear vibrating screen is a new high-efficiency screening device and is equipped with two layers of mesh screens, and the movement trajectory of the screen surface is approximately linear. The vibrating screen features a simple structure, large screening capacity, low energy consumption and easy operation. It is widely applied in the industries of mining, coal, electric power, metallurgy, building materials, refractory materials, etc. It is suitable for screening of large block materials as well as medium and small particle materials.
The core components include a screen box, vibration motors, a vibration damping system, a machine frame, discharge outlets and a control system. By means of the linear vibration generated by the vibration motors, materials can perform the projectile linear motion on the two layers of mesh screens with different mesh sizes, fulfilling the functions of material classification, screening and impurity removal. The machine can separate materials into three different particle size specifications through the two layers of mesh screens and the bottom discharge outlets.
Working Principle
Two vibration motors are installed and rotate synchronously in opposite directions to drive the machine, and the entire machine generates linear vibration while being supported by the vibration damping device. After materials fall into the screen box from the feed end, they rapidly undergo a series of actions of moving, loosening and passing through the screen meshes, and finally the screening process is completed.
The entire machine consists of the screen box, the vibration motors, the vibration damping system and the machine frame. The screen box is composed of stainless steel mesh screens and stainless steel pressing bars. The machine is equipped with the high-performance waterproof vibration motors, and the material flow rate can be controlled by adjusting the height of the material baffle at the feed inlet. The vibration damping system comprises rubber springs, supporting bases and other components.
Product Parameters MaterialStainless steel Voltage110V Power120W ×2 Number of mesh screens2pcs Mesh size4mm, 2mm Mesh shapeCircular meshes Machine size143.5*52.5*66.5cm (56.5*20.67*26.18 inches) Note: We also provide other sizes of screen, and if you need, please contact us. Attention
- 1. Site Inspection: Select a flat, firm and dry site.
- (1) Space Reservation: Reserve an operating space of ≥50cm around the equipment, and a feeding space of >1m above the feed inlet.
- (2) Environmental Requirements: Keep away from environments with flammable, explosive or corrosive gases. Ensure good ventilation for indoor use. Install a rain shelter for outdoor use to prevent the motors and electrical components from getting damp.
- 2. Equipment Inspection: Check the appearance and fixing situations.
- 3. Mesh Screen Inspection: Ensure the two layers of mesh screens are installed stably. The bottom layer is the 2mm round-hole mesh screen, and the top layer is the 4mm one.
- 4. Material Pre-Treatment:
- (1) Remove large impurities (e.g., stones, metal blocks and caked lumps) from the materials to avoid blocking or damaging the mesh screens.
- (2) For high-humidity materials which are prone to caking, conduct crushing and drying treatment in advance to ensure the materials are loose and easy to screen.
Product Features
1. Stainless steel material: Excellent corrosion resistance, easy to clean, and durable for long-term use.
2. Two-layer classification: Obtaining materials of three specifications through one-time screening, with high classification efficiency, meeting different requirements of customers.
3. Linear vibration design: Stable material movement trajectory, high screen mesh utilization rate and high screening accuracy.
4. Vibration damping system: Made of rubber and stainless steel materials, with low running noise and reducing the impact on the installation site and associated equipment.
5. Easy maintenance: The screen meshes are secured with high-quality fixing bolts, and replacement and operation are easy and convenient.
6. Compact size, large screening capacity, light weight and simple structure.
Vibration Motors
The double vibration motors are designed for driving the machine to conduct linear vibration, effectively improving the vibration strength, vibration stability and screening efficiency and ensuring long-term continuous operation.
Material Baffle
The stainless steel material baffle is detachably installed in the feeding hopper, can be adjusted to control the material flow rate as needed and is high in structural strength, resistant to wear and corrosion and convenient to adjust.
Mesh Screens
The machine is equipped with two mesh screens with the mesh sizes of 4mm and 2mm, materials of three specifications can be screened and separated, the screening efficiency and quality are higher, and the screening effect is better.
Press Bars
The stainless steel press bars are designed for effectively fixing the mesh screens and preventing the mesh screens from deviation. The built-in silicone gel gaskets can protect the mesh screens from wear and leakage and ensure the sealing performance.
Discharging Outlets
The three-stage discharging outlets are used to smoothly discharge materials of different specifications, facilitating independent collection of different materials and saving time and labor.
Damping Springs
The high-elasticity damping springs stably support the machine body, effectively isolate vibration transmission, improve the screening stability and keep dynamic balance of the machine body.
Operation Method
A. No-Load Test Run
- 1. Connect the power supply, turn on the control switch, start the machine, and run it without the load for 5–10 minutes.
- 2. Observe the operating status: the mesh screens vibrate steadily without deviation or abnormal shaking, and the motors run without abnormal noise.
- 3. Inspect key parts: bolts are free of looseness, the vibration-damping springs are compressed evenly, and the mesh screens are free of abnormal noise.
B. Load Operation
- Feeding Operation:
- (1) Start the machine and begin uniform feeding after the no-load operation is stable.
- (2) Feeding method: Materials can be added evenly through hoppers, conveyors or other equipment. Ensure the materials are distributed uniformly along the width of the feed inlet to avoid one-sided accumulation.
- (3) Feeding quantity control: Adjust the feeding quantity according to the processing capacity of the machine. It is appropriate that a uniform material layer (with the thickness of 2–5cm) is formed on the screen surface. Overloaded feeding is strictly prohibited to avoid damage to the mesh screens or incomplete classification.
- Abnormality Handling:
- (1) Material jamming/blocking: Stop feeding immediately, stop the machine after all materials on the screen surface have been screened, and remove debris blocking the screen meshes. Do not reach into the machine to clean during operation.
- (2) Abnormal noise/vibration: Stop the equipment immediately. Inspect for loose bolts, damaged mesh screens or motor malfunctions. Restart the machine only after troubleshooting and repair are completed.
- Shutdown Operation: Stop feeding. After all materials on the screen surface have been discharged, turn off the power supply, turn off the main switch, and perform thorough cleaning of the machine.
Product Display Items Included (270009) Components
1 × Stainless Steel Two‑layer Linear Vibrating Screen 110V
Shipping & Handling Details Default ShippingFree shipping for lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us. Remote AreasBuyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas — extra shipping costs apply; contact us for details. Address ValidationEnsure address is valid for UPS and USPS services. Costs incurred because of incorrect or undeliverable address are buyer\'s responsibility. Handling TimeShipping is usually made in 1-3 business days after payments cleared. Orders processed Monday-Friday; not on weekends & public holidays. Sales Tax / CustomsAny sales taxes or Customs duties are not included. If incurred, they must be undertaken by the buyer. Damage In ShippingEmail or call us first! We will work with you to get the case resolved in the fastest method. Return & Refund Policy Return Period30 days from delivery date. Items must remain unused with original packaging intact. Partial refunds may apply for opened items based on condition assessment. Customer-Initiated ReturnsReturn shipping costs and original shipping fees remain customer responsibility. A 15% restocking fee applies to customer-initiated returns. Seller Error ReturnsFull refund including shipping costs provided for returns resulting from seller error. Return AuthorizationContact customer service for Return Authorization (RA) number prior to returning items. Defective ProductsProvide photographic or video documentation of damaged or defective items within 7 days of receipt. Replacement or refund provided for verified cases. Warranty & Technical Support Warranty Period6 months warranty coverage for mechanical components (excludes consumable items). Technical support remains available beyond warranty period. Warranty ShippingCustomer responsible for shipping costs to service center for warranty claims. Return ShippingSeller covers return shipping costs for warranty repairs. Customer SupportContact us for any operational concerns. We are committed to customer satisfaction and providing the best purchase experience. c — technical documentation style · TECHTONGDA®
On Mar 16, 2026 at 22:23:21 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.