Packageincludes
10 Pieces Ultrasonic Module
Productdescription
Description:
Module maintechnical parameters:
1.WorkingVoltage : 5V(DC)
2.Staticcurrent: Less than 2mA.
3.Outputsignal: Electric frequency signal, high level 5V, low level 0V.
4.Sensorangle: Not more than 15 degrees.
6.Highprecision: Up to 0.3cm
7.Input trigger signal: 10us TTL impulse
8.Echosignal : output TTL PWL signal
Mode ofconnection:
1.VCC
2.trig(T)
3.echo(R)
4.GND
Use method:
Supplymodule with 5V, the output will be 5V while obstacle in range, or 0V if not.The out pin
of this module is used as a switching outputwhen anti-theft module, and without the feet when
ranging modules.
Note : themodule should be inserted in the circuit before been power, which avoidproducing
high level of misoperation; if not, then poweragain.
Module Working Principle:
1.Adopt IO trigger through supplying at least10us sequence of high level signal.
2.The moduleautomatically send eight 40khz square wave and automatically detect whetherreceive
the returning pulse signal.
3.If thereis signals returning, through outputting high level and the time of high level
continuing is the time of that from theultrasonic transmitting to receiving. Test distance =
(high level time * sound velocity (340M/S) /2.
Note : Thismodule is not suitable to connect with electric power, if you need to connectthis
module with electronic power,then let the GNDterminal of this module to be connected
first,otherwise, it will affect the normalwork of the module
If you wouldlike a FREE catalog of my store,just add
a note, or send me a message,during or after check out.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.