10PCS FT232 FT232RL FTDI USB 3.3V 5.5V to TTL Serial Adapter Module Type-C

• Home
• Electronic Component
• Chips
• Sensor
• Arduino Module
• Raspberry Pi

FT232 FT232RL FTDI USB 3.3V 5.5V to TTL Serial Adapter Module Type-C Interface PopularPopular

Product Introduction

Product features:
1.Using USB2.0 the best FT232RL chip, USB power supply using 500MA fuse (FUSE) to protect your USB power supply and equipment, more stable performance;
2.FT232RL USB to Serial Module USB to TTL level, USB2TTL protection version supports overcurrent protection version;
3.This product uses a new design, the use of USB 2.0 FT232RL chip, the USB into a serial port. With two power versions;
4. Each module in the factory using self-receiving 10W byte test passed;
5. Upgrade TYPE-C interface power supply, support 3.3V 5V downloader burner line, optional 5V or 3.3V interface level.FT232R Introduction:
With the development of computer technology, parallel and serial ports are slowly disappearing from PCs, and now even desktops have fewer parallel ports. But for engineers, both parallel and serial ports are essential interfaces, especially the serial port. For the computer without a serial port, the most convenient solution is to use the USB to serial chip to virtualise a serial port out of many manufacturers have produced such a chip, such as silicon LABS CP210x series, TI\'s TUSB3410, Nanjing Qinheng CH34x series, FTDI FT232 series, Prolific\'s PL230x series, Aike\'s ARK34x series, FTDI FT232 series, FTDI FT232 series, Prolific\'s PL230x series. series, Prolific\'s PL230x series, ARK3116 series, and so on. From the stability point of view, it is the FT232 series that is the most reliable, and you can use it to debug the programme without worrying about the blue screen.
The FT232R is a single chip solution that requires no peripherals for general use, even the crystal, USB matching resistor, and EEPROM for product information are already integrated inside, and the FT232R also has some useful features, details of which can be found in the FT232R datasheet.Parameter Description:
Leads to all signal ports of the FT232RL chip, TTL/CMOS level;
RXD/TXD transceiver communication indicator;
Adopts TYPE-C interface, USB power supply, optional 5V or 3.3V interface level (if other levels are required, the target voltage can be provided directly on the VCC and GND pins).
The 6 pin definitions are: DTR RX TX VCC CTS GND
PCB board size:17mm*32.5mm
Module size:36mm*17mm(with row of pins)

Product List:
1X Module

• Payment must be received in 5 business days of sale closing.
• Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
• Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

Shipping

• We maintain high standards of excellence and strive for 100% customer satisfaction! response is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.

Refund

• All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can\'t take a refund.
• If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
• If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

• Home
• Electronic Component
• Chips
• Sensor
• Arduino Module
• Raspberry Pi

FT232 FT232RL FTDI USB 3.3V 5.5V to TTL Serial Adapter Module Type-C Interface

Product Introduction

Product features:
1.Using USB2.0 the best FT232RL chip, USB power supply using 500MA fuse (FUSE) to protect your USB power supply and equipment, more stable performance;
2.FT232RL USB to Serial Module USB to TTL level, USB2TTL protection version supports overcurrent protection version;
3.This product uses a new design, the use of USB 2.0 FT232RL chip, the USB into a serial port. With two power versions;
4. Each module in the factory using self-receiving 10W byte test passed;
5. Upgrade TYPE-C interface power supply, support 3.3V 5V downloader burner line, optional 5V or 3.3V interface level.FT232R Introduction:
With the development of computer technology, parallel and serial ports are slowly disappearing from PCs, and now even desktops have fewer parallel ports. But for engineers, both parallel and serial ports are essential interfaces, especially the serial port. For the computer without a serial port, the most convenient solution is to use the USB to serial chip to virtualise a serial port out of many manufacturers have produced such a chip, such as silicon LABS CP210x series, TI\'s TUSB3410, Nanjing Qinheng CH34x series, FTDI FT232 series, Prolific\'s PL230x series, Aike\'s ARK34x series, FTDI FT232 series, FTDI FT232 series, Prolific\'s PL230x series. series, Prolific\'s PL230x series, ARK3116 series, and so on. From the stability point of view, it is the FT232 series that is the most reliable, and you can use it to debug the programme without worrying about the blue screen.
The FT232R is a single chip solution that requires no peripherals for general use, even the crystal, USB matching resistor, and EEPROM for product information are already integrated inside, and the FT232R also has some useful features, details of which can be found in the FT232R datasheet.Parameter Description:
Leads to all signal ports of the FT232RL chip, TTL/CMOS level;
RXD/TXD transceiver communication indicator;
Adopts TYPE-C interface, USB power supply, optional 5V or 3.3V interface level (if other levels are required, the target voltage can be provided directly on the VCC and GND pins).
The 6 pin definitions are: DTR RX TX VCC CTS GND
PCB board size:17mm*32.5mm
Module size:36mm*17mm(with row of pins)

Product List:
10X Module

• Payment must be received in 5 business days of sale closing.
• Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
• Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

Shipping

• We maintain high standards of excellence and strive for 100% customer satisfaction! response is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.

Refund

• All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can\'t take a refund.
• If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
• If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.