10CM Geomembrane Welder PVC Plastic Layer Overlap Sealing Welding Machine 110V

Description

Specification:

Lap Width: 10cm
Voltage: 110v 50hz
Welding Material Thickness: Rubber Wheel 0.2-1.5mm
Welding Seam Width: Two 12.5mm, Inspection Seam 12mm
Power: 800w
Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction)
Welding Speed: 0.5-5m/Min
Whole Machine Weight: 5kg
Product Size: 31*14*21cm (12.20*5.51*8.26inch)
Heating Temperature: 0-450
Insulation Class: Class Li
Power Fuse: 4a
Motor Fuse: 1a

Scope of Application: Suitable for Pe, Pvc, Hdpe, Eva, Pp

Operation Procedure:
1. the Joystick Is Leveled to Separate the Upper and Lower Pressure Rollers to Prevent the Pressure Roller from Idling and Damaging the Machine After Starting the Machine.
2. Turn on the Power and Turn on the Power Switch.
3. Set the Temperature First. for Materials Above 1mm, the Temperature Is Adjusted to About 350 Degrees. When the Indicator Light on the Control Box Is Red, It Is Heating.
4. Adjust the Welding Speed According to the Thickness of the Material. According to the Normal 1mm Material, the Speed Is Adjusted to About 2.5m.
5. When the Red Light of the Control Box Turns to Green, Put the Materials in from the Left and Right Sides of the Machine, and the Joystick Is Driven from Bottom to Top, and It Is 90 Degrees to the Ground.
6. Adjust the Speed According to the Welding Effect, the Temperature Is High and the Speed Is Fast, on the Contrary, the Temperature Is Low and the Speed Is Slow (Try Not to Adjust the Speed and Temperature in the Middle, Set the Temperature First When Turning on, If the Material Is Thinner or the First-time Operation, Set the Temperature Lower When Turning on).
7.After the Welding Is Completed, Immediately Level the Joystick to Separate the Upper and Lower Pressure Wheels (to Prevent the Pressure Roller from Being Burned by High Temperature), Then Adjust the Temperature Speed to the Lowest, and Finally Shut down and Unplug the Power Supply.

Product Highlights 1. Intelligent Control, Control Box
response Type Intelligent Control System, Using Imported Components, Precise Control and Long Service Life.
2. Imported Silicone Pressure Roller, Good Elasticity, High Temperature Resistance, Suitable for Welding 0.2-1.5mm Materials.
3. Super Power
Special Alloy Wedge Knife Supporting High-power Heating Tube (800w), Heating Faster
4. Pressure Adjustment Instructions
Turn Clockwise to Adjust the Pressure to Increase, and Turn Counterclockwise to Reduce the Pressure; It Is Forofferden to Press the Two Pressure Rollers Together to Run Idly
5. Wide Range of Application
Widely Used in Highways, Tunnels, Bridges, Reservoirs, Buildings, Artificial Lakes, Swimming Pools, Breeding Ponds, Landfills Package includes 1 x Climbing Welding Machine
1 x Tool Accessory Kit
1 x Tool Box
1 x Manual Payment Shipping Returns Contact Us 1. All payments must be prepaid.

2. We only accept payment via Paypal. Please kindly check if you can do the payment via before placing an order,Payment must be received within 7 days after order is made. 1. We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.

2. Items are generally shipped out the next business day after your payment has been cleared (Sat. & Sun. excluded.)

NOTE：Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-7 working days to:USA

it may take a bit longer time, due to local dispatches ,
Customs checking, High Season period, eg. x\'mas or other reasons. Your patience is always appreciated 1. We offer 30 days money back guarantee return policy.

2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user\'s part.

3. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item. Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00
1. We are in different time zones, during the working time, we will reply your email within 24 hours. If it\'s non-workdays, please kindly be patient and considerable to give us a little more time.
2, please with message if we made a deal on . E-mail is often filtered as spam.
3, Please wait for our reply to your email, we will do our best to help you solve the problem. Specification:
Lap Width: 10cm
Voltage: 110v 50hz
Welding Material Thickness: Rubber Wheel 0.2-1.5mm
Welding Seam Width: Two 12.5mm, Inspection Seam 12mm
Power: 800w
Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction)
Welding Speed: 0.5-5m/Min
Whole Machine Weight: 5kg
Product Size: 31*14*21cm (12.20*5.51*8.26inch)
Heating Temperature: 0-450
Insulation Class: Class Li
Power Fuse: 4a
Motor Fuse: 1a
Scope of Application: Suitable for Pe, Pvc, Hdpe, Eva, Pp
Products include:
1 x Climbing Welding Machine
1 x Tool Accessory Kit
1 x Tool Box
1 x Manual