1 Pack Solar Motion Sensor Light Outdoor RGBW 4 Color Magnetic Remote Wall Lamp

Parameter

Value

Model

P112

LED Beads

56 LEDs per light

Light Colors

White / Red / Blue / Green

Brightness Levels

3 levels (via remote)

Solar Panel

Monocrystalline silicon

Battery

Built-in 18650 rechargeable battery (1500mAh)

Charging Input

Solar + USB Type-C (5V/1A)

Working Time

8–12 hours per full charge (sensor mode)

PIR Detection Angle

120°

PIR Detection Distance

Up to 26 ft (8 m)

Rotation

360° horizontal + 45° vertical tilt

Waterproof Rating

IP65

Material

ABS + PC

Light Body Size

6.3 in (H) × 3.54 in (W)

Arm Length

5.12 in

Magnetic Base Diameter

2.76 in

Mounting Options

Magnetic / 3M adhesive / Screws

Remote Control Range

Up to 26 ft (8 m)

Operating Temperature

-4°F to 140°F (-20°C to 60°C)

Each light is built with 56 high-brightness RGBW LED beads. Switch between Red, Blue, Green, and White instantly with the included remote. White mode delivers powerful security lighting; Red/Blue/Green modes create stunning ambiance for parties, holidays, gardens, driveways, and walkways.

■ 2. SOLAR + USB-C DUAL CHARGING

Charge during the day with the built-in solar panel on sunny days, or use the USB Type-C port to top up the 18650 battery on rainy winter days. No more dead lights after a week of cloudy weather — always have light when you need it.

■ 3. PIR MOTION SENSOR + REMOTE CONTROL

The built-in PIR sensor detects movement up to 120° angle and automatically turns the light on at night, then off after no motion to save battery. The included remote lets you switch ON/OFF, change colors, and select 3 brightness levels from up to 26 ft away.

■ 4. STRONG MAGNETIC MOUNT — 360° ROTATION

The base features strong magnets that snap onto any metal surface (garage door, metal fence, RV, trailer, storage shelf) in seconds — no drilling, no tools. The joint rotates 360° horizontally and tilts 45° vertically to aim light exactly where you need it. Also includes 3M adhesive pads and screws for non-metal walls.

■ 5. IP65 WEATHERPROOF — ALL-YEAR OUTDOOR USE
Sealed ABS+PC housing resists rain, snow, heat, frost, and dust. Rated IP65 waterproof for year-round outdoor use. Perfect for garage, yard, patio, porch, driveway, shop entrance, fence, garden, camping, RV, and night fishing.

Upgrade your outdoor lighting with the P112 Solar Magnetic Motion Sensor Light. Featuring 56 high-brightness RGBW LEDs and 4 selectable color modes (Red / Blue / Green / White), this versatile light doubles as a powerful security lamp and a colorful ambiance light. With solar + USB-C dual charging, a strong magnetic mount, 360° rotation, and remote control, installation takes seconds — no wiring, no electrician, no drilling required. IP65 waterproof rated for year-round outdoor use in rain, snow, or shine.

Feature

Why It Matters

Dual Charging (Solar + USB-C)

Most solar lights die after cloudy weeks. Ours charges by solar by day AND via USB Type-C for emergency backup — always ready.

4 Colors in One Light

Competitors sell single-color white lights. Ours gives you White for security + Red/Blue/Green for parties, holidays, garden accents, and warning lighting.

56 LEDs vs. 30-40 LEDs

Higher LED count means brighter, more even illumination across a wider area.

Magnetic + 360° Mount

Snap onto any metal surface in seconds. Aim the light exactly where you need it with full 360° rotation and 45° tilt.

• Charge the light for 8–10 hours under direct sunlight before first use. Full charge takes about 8 sunny hours.

• The motion sensor only activates in darkness. During daytime, the light will not turn on even if motion is detected — this is normal.

• Solar charging performance depends on sunlight intensity, geographic location, season, and weather. USB-C charging is recommended as backup during long cloudy periods.

• For best magnetic adhesion, install on clean, flat, ferromagnetic metal surfaces. Stainless steel, aluminum, and galvanized surfaces may have weaker magnetic hold — use screws or 3M adhesive instead.

• Clean the solar panel periodically with a damp cloth to maintain charging efficiency.

• The remote control requires a clear line of sight to the light for best performance.

• Do not submerge the light in water. IP65 protects against rain and water jets, not immersion.