1-10pcs PICKit3 Debugger Programmer Emulator PIC Controller Development Board

Sales for every weekend!
For Raspberry Pi
For R3
USB/LCD L/C Meter
Power supply
Step up module
Step down module
Adapter Module
Display module
Development Board

Voltmeter

1-10pcs PICKit3 Debugger Programmer Emulator PIC Controller Development BoardFeatures:
Full-speed USB support using Windows standard drivers
Real-time execution
Processors run at maximum speeds
MPLAB IDE compatible (free copy included)
Built-in over-voltage/short circuit monitor
Firmware upgradeable from PC/web download
Totally enclosed
Supports low voltage to 5 volts (1.8v to 5.0v range)
Diagnostic LEDs (power, active, status)
Read/write program and data memory of microcontroller
Erase of all memory types (EEPROM, ID, configuration and program) with verification
Freeze-peripherals at breakpoint
Program up to 512K byte flash with the Programmer-to-Go

Basic Debugger System:
The debugger system can be configured to use standard ICSP communication for both programming and debugging functions.

CAUTION: Do not change hardware connections while the PICkit3 or target is powered.


Supported Devices:
Refer to MPLAB IDE v8.76, the following devices are supported:
PIC10F
PIC12F
PIC16F
PIC18F
PIC24F
dsPIC30
dsPIC39
dsPIC33
dsPIC32
11 Series Serial EEPROM Devices
24 Series Serial EEPROM Devices
24LC/AA/C00,24LC/AA01B, 02B, 04B, 08B,24LC/AA16B, 32A,24LC/AA/FC64, 128, 256, 512,24LC/AA/FC1025
25 Series Serial EEPROM Devices
25LC/AA010A, 020A, 040A,25LC/AA080A, 080B, 160A, 160B,25LC/AA320A, 640A,25LC/AA128, 256, 512, 1024
93 Series Serial EEPROM Devices
25LC/AA/C46A, 46B, 46C,25LC/AA/C56A, 56B, 56C,25LC/AA/C66A, 66B, 66C,25LC/AA/C47A, 76B, 76C,25LC/AA/C48A, 86B, 86C
MCP250xx CAN Devices
MCP25020, 25025,MCP25050, 25055

Debugger To Target Communication:
Connecting the PICkit3 to the target board through standard ICSP interface using 6-pin connector. The programmer connector pinout is shown in the figure below:


PICkit3 Status LEDs:
The Status LEDs indicate the status of the PICkit3.
Power (green) – Power is supplied to the PICkit3 via the USB port.
Active (blue) – The PICkit3 has connection to the PC USB port and the communication link is active.
Status:
Busy (yellow) – The PICkit3 is busy with a function in progress, such as programming.
Error (red) – The PICkit3 has encountered an error.

Package Included:
1-10 x PICKit3 PIC KIT3 Debugger Programmer Emulator PIC Controller Development Board

Shipping

We will arrange shipping for you within 24 Hours after payment cleared except the holidays.

We only ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

-We ship items to Worldwide. Thank you!

-we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.

Refund

* We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

* If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.

* Please include your ID and item number with any email requests.

response

* When you satisfied with our product and services please leave us positive response.

* If you have got the package, please confirm \"Delivery on time\" For us.

* If a problem occurs, contact us immediately with any email request.

* Just contact us using the \" Ask the seller a question\" link on .

Am 13.01.2026 hat der Verkäufer die folgenden Angaben hinzugefügt: