The rosco_m68k is an open-source, self-build Motorola 68k computer designed for experimentation, education, and low-level development. It is based on the Motorola MC68010 CPU and provides a clean, approachable platform for classic 68k programming, retro-computing projects, and hardware hacking.
This is a DIY electronic kit intended for users with experience in electronics assembly and basic debugging.
Overview
The board features a 16/32-bit Motorola 68010 processor running at 10 MHz, paired with 1 MB of RAM and 1 MB of Flash ROM with in-system programming support. Advanced serial I/O is provided by the on-board SCN68681C1A44 dual UART.
With open-source firmware, an Easy68K-compatible I/O layer, and example projects in both C and 68k assembly, the system is ready for custom software development once assembled.
Ships with firmware version 2.4 and supports SD card storage via an SPI MicroSD adapter.
Key Features
Motorola MC68010 16/32-bit CPU @ 10 MHz
1 MB RAM
1 MB Flash ROM (in-system programmable)
On-board dual UART (115200 bps standard)
Serial bootloader using the Kermit protocol
Easy68K-compatible I/O layer in firmware
SD card support (via SPI MicroSD adapter)
Expansion connector for new and legacy (MC6800-style) peripherals
Built-in support for the Xosera retro video adapter (additional hardware required)
All through-hole components
4-layer PCB with generous spacing, solder mask, and tented vias
Who This Is For
This kit is designed to be approachable but is not a consumer product. It is suitable for:
Embedded and low-level software developers
Retro-computing enthusiasts
Students learning computer architecture
Hardware hackers and experimenters
Assembly, testing, and basic troubleshooting are required.
What’s Included
rosco_m68k main PCB
Motorola 68010 CPU (DIP package)
RAM and supporting logic ICs
Passive components required for a standard build
Socketed components where applicable
SPI MicroSD Card adapter module
Exact contents may vary slightly by kit revision. Please refer to the photos for the actual items included.
UART socket is included but may not be visible in all photos.
BOM reference:
[link removed by ]
What You’ll Also Need
Recommended:
USB-to-serial (FTDI-type) adapter
USB-to-Dupont power lead
Useful for development and debugging:
Software & Firmware
All hardware designs, firmware, and software are fully open source.
Available resources include:
Standard firmware
Example projects in C and 68k assembly
Libraries for serial I/O, GPIO, and more
Development is typically done on macOS or Linux using a GCC-based m68k toolchain. Windows users can use WSL. Programs are loaded over serial using the Kermit protocol.
The default firmware provides an Easy68K-compatible I/O layer, allowing many Easy68K simulator programs to run on real hardware with little or no modification. Users are free to replace the firmware entirely if full control is desired.
Important Information
This is a DIY kit, not a finished or consumer product
Assembly is required
No warranty is provided
Incorrect assembly may result in non-functional hardware
Intended for experienced users
Shipping
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.