ITEM DESCRIPTION
- 18 pre programmed patterns to select.
- User can select one or more patterns to run.
- Running speed can be controlled.
- Pattern loop count can be edited.
- 50 slot pattern memory.
SWITCHING INTO PROGRAMMING MODE
1. Power off the board.2. While pressing \"SELECT\" and \"NEXT\" buttons simultaneously, switch power on.3. Power LED will start to blink.4. Release two buttons.5. First pattern will run continuously.6. Board has switched into programming mode.
SWITCHING INTO RUN MODE
1. Power off the board.2. Do not press any button, switch power on.3. Power LED on and board starts to run stored patterns.4. Patterns follow selected/stored order.
HOW TO SELECT PATTERNS
(*Assumes you have switched into programming mode*)(*Assumes you wish to select second pattern with 4 loops*)
1. Keep pressing \"NEXT\" button until pattern stops.2. Release \"NEXT\" button will go into second pattern.3. Keep pressing \"SELECT\" button until pattern stops.4. Release \"SELECT\" button. You have selected the pattern.5. Single LED will light up showing loop count.6. You can set 8 loops maximum.7. Press-Release \"NEXT\" button to count up loops.8. Press-Release \"SELECT\" button to select loop count.9. Returns to pattern display again.10. Proceed using \"NEXT\" button.
(*switch power off-on to go back to RUN mode*)
EPSiCON LabsPROGRAMMABLE CHASER
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.