Wireless N64 Controller for Switch/ Switch 2/ Original N64 Console/ PC/ MAC NEW

Wireless controller compatible with a variety of platforms, work for Original Nintendo 64 System and Switch Console (Switch /Switch 2, Switch OLED),Windows PC/MAC or Raspberry Pi. Connection modes: 2.4G Wireless USB Dongle/N64 adapter.⁂ For the PC(USB 2.0 port), you can download the N64 emulator(Such as project 64); For Switch, \"Pro Controller Wired Communication\" must be enabled before pairing. And you can play most of retro N64 games very well, such as Mario Party game,Zelda N64,okémon Snap, Star fox, Smash Bros, Kirby, Glover or any other N64 games in the 90’s.⁂ USB dongle can fast connect by downloading the game emulator in windows system, PC running operating system:Windows 98/2000/ ME/XP/Vista/Win7/8/8.1/11 or later,or Mac running OS X 10.0/Mac OS X or above.2.4 Ghz Wireless Game Controller for Nintendo 64 Console N64 Game System；For RetroPie,PC Windows,Switch,Raspberry Pi

Package Contents:

1 x Wireless N64 Controller

1 x N64 Receiver

1 x USB Receiver

1 x USB-C Charging Cable

1 x User Manual

Compatibility Notes:

This controller is supplied with two distinct receivers:

N64 receiver: compatible exclusively with N64 consoles

Standard USB receiver: compatible with Switch, Switch 2, Windows PCs, and macOS devices

Recommended Emulators:

For Windows PC: Project 64

For macOS device: OpenEmu

Wireless Controller Perfectly Compatible With N64 /Switch & Switch Lite

• Widely Compatibility
• Use a N64 Original port(included), mainly works with Nintendo 64 Entertainment System Console.
• Use a USB 2.4 GHz receiver(included), it can run Windows PC, Mac and Raspberry PI .
• Compatible with Nintendo Switch and Switch Lite when connected via USB

How to pair on the switch:

1.Click the menu “System settings “by Switch Joypad , find the icon”Controllers and Sensors” and click the button“ Pro Controller Wired Communication\" must be ON status.

2.Plug the receiver into your switch and the red led starts flashing, press and hold the \"SYNC\" button on the receiver until it fast-blinking.

3. Press the\"Reset“ button on the top of the controller , the led on the controller starts flashing.

4. Press the\" Start” button, the LED stays lit and the controller is connected.

Q: When the controller didn’t work and connect the switch?

A: For Switch, please sets the icon\" Pro Controller Wired Communication is ON \" in the system settings.

Q: Why the rumble feature is not supported the MAC or switch?

The rumble feature are activate when it is working for the N64 consoles or by selecting X-input mode and configuring additional settings such as “rumble” in the emulator.

Notice： When you switching devices, you have to re-pair the controller, please press the “reset”button, then pair the controller step by step as if it were used at the first time

How to pair your N64 device:

1)When you first pair the controller, Plug in the N64 receiver to N64 console, then press the \" reset“ button of the gamepad.

2)Press the START button to wake up the controller, and the light flashes quickly.

3)Finally, please press the button on the receiver for 3S, the red LED will flash rapidly and is always on after the pairing successfully.

Note: When connecting to your Switch Console:1,\"Pro Controller Wired Communication\" must be enabled before pairing: Mean that:\"Pro Controller Wired Communication\" shown:OnTo play N64 games on Switch, enter All-Star mode by pressing and holding the Start + A buttons for 5 seconds.Note:
No rumble on N64 console: Flip receiver switch to \"Rumble\" before powering on the console
No rumble on PC (Project64): Switch to X-input mode and enable rumble in emulator settings
Regarding the memory card functionality: As a 1:1 N64 original replica, memory card and rumble functions cannot work simultaneously. Flip the receiver switch to Rumble / Memory mode before turning on the console.