DESCRIPTION
BG95 EVB Development Board Designed For QuecPython, Low Power Consumption, Supports LTE / EGPRS Communication And GNSS Positioning BG95 EVB Development Board
Compact & Portable Development Board Designed for QuecPython
Supports LTE Cat M1 / LTE Cat NB2 / EGPRS Communication, GNSS Positioning
Features At A Glance
TheBG95-M3 Zerodevelopment board is equipped withBG95-M3module, which is a multi-mode LPWA module supporting LTE Cat M1 / LTE Cat NB2 / EGPRS. It is 3GPP Rel-14 compliant and offers maximum data rate of 588 kbps downlink and 1119 kbps uplink under LTE Cat M1. Features ultra-low power consumption with built-in MCP as well as the ARMCortex A7 processor supporting ThreadX.
- Equipped with BG95-M3 main module, supports LTE Cat M1 / LTE Cat NB2 / EGPRS networking, applicable across global regions
- Onboard 40PIN GPIO header, compatible with most Raspberry Pi HATs
- 5 LEDs for indicating module operating status
- Onboard Type-C port for easy development with just a USB Type-C cable
- Supports PPP, TCP, UDP, SSL, TLS, FTP(S), HTTP(S), NITZ, PING, MQTT, LwM2M, CoAP, IPv6 protocols, etc.
- Supports GNSS positioning (GPS, GLONASS, BDS, Galileo, QZSS)
- Onboard Nano SIM card slot, supports 1.8V SIM card, and is designed near the edge of the board for easy insertion and removal of SIM card
- Provides tools such as QPYcom, Thonny IDE plugin, and VSCode plugin, etc. for easy learning and development
- Comes with online development resources and manual (example in QuecPython)
Specifications MODEL BG95-M3 EC200U-EU EC200U-AU Product Picture Applicable Region Global Europe, Middle East, Africa, Australia, New Zealand, Brazil Australia/Latin America FREQUENCY BAND LTE-FDD Cat M1:
B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B27, B28, B66, B85
Cat NB2:
B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B28, B66, B71, B85 B1, B3, B5, B7, B8, B20, B28 B1, B2, B3, B4, B5, B7, B8, B28, B66 LTE-TDD N/A B38, B40, B41 GSM / GPRS / EDGE 850, 900, 1800, 1900 MHz GSM: B2, B3, B5, B8 GNSS GPS, GLONASS, BDS, Galileo, QZSS Bluetooth N/A Bluetooth 4.2 (BR/EDR) Wi-Fi Scan N/A 2.4 GHz 11b (Rx) DATA TRANSMISSION CAT 1 N/A LTE-FDD: DL 10 Mbps; UL 5 Mbps
LTE-TDD: DL 8.96 Mbps; UL 3.1 Mbps NB-IoT Cat NB2:
DL 127 Kbps; UL 158.5 Kbps
Cat NB1:
DL 32 Kbps; UL 70 Kbps N/A Cat-M DL 588 Kbps; UL 1119 Kbps N/A GSM / GPRS / EDGE EDGE: DL 296 Kbps; UL 236.8 Kbps
GPRS: DL 107 Kbps; UL 85.6 Kbps GSM: DL 85.6 Kbps; UL 85.6 Kbps OTHERS Type-C USB Port Supports AT commands testing, GNSS positioning, firmware upgrading, etc. Communication Protocol PPP, TCP, UDP, SSL, TLS, FTP(S), HTTP(S), NITZ, PING, MQTT, LwM2M, CoAP, IPv6 TCP, UDP, PPP, NITZ, PING, FILE, MQTT, NTP, HTTP, HTTPS, SSL, FTP, FTPS, CMUX, MMS SIM Card Nano SIM card (supports 1.8V only) Nano SIM and eSIM, dual card single standby Indicator SIM_CHK: lights up when a SIM card is inserted into the card slot
NET: Network indicator
PSM: Sleep indicator
PWM: PWM function indicator
PWR: Power indicator P01: Module Pin 1, default as EC200A-XX PWM0
P05: Module Pin 5, NET_MODE indicator
SCK1: SIM1 detection indicator, lights up when SIM1 card is inserted
SCK2: SIM2 detection indicator, lights up when SIM2 card is inserted
PWR: Power indicator Buttons PWK: Power ON/OFF
PON: PSM wake-up
BOOT: Forcing into firmware burning mode
USB ON/OFF: USB power consumption detection switch PWK: Power ON/OFF
RST: Reset
BOOT: Forcing into firmware burning mode
USB ON/OFF: USB power consumption detection switch Antenna Connectors LTE main antenna + DIV antenna + GNSS antenna LTE main antenna + DIV / WIFI (scanning only) / Bluetooth antenna + GNSS antenna Operating Temperature -30 ~ 75°C Storage Temperature -45 ~ 90°C
Type-C Interface
Easy To Develop With Just A USB Type-C Cable
Onboard 40PIN GPIO Header
Compatible With Most Raspberry Pi HATs
Supports Various Development Tools
Provides Tools Such As QPYcom, Thonny IDE Plugin, And VSCode Plugin, Etc. For Easy Learning And Development
What’s Onboard
Onboard Components
- BG95-M3 module
- TPS63020DSJR power IC
- TLV75533PDRVR power IC
- NCP114AMX180TBG power IC
- TXS0104EYZTR voltage level translator
- Nano-SIM card slot
- NET Network indicator
- PSM Sleep indicator
- PWM function indicator
- PWR Power indicator
- SIM_CHK indicator
lights up when SIM card is inserted - Power ON/OFF button
- PSM wake-up button
- BOOT button
Press before powering on to force firmware burning mode - USB detection ON/OFF
Normally closed: USB can be connected normally;
Normally open: Type-C supplies power only to the evaluation board, used for module power consumption measurement
Interfaces
- Raspberry Pi GPIO Header
Compatible with Raspberry Pi HATs, for more details, please refer to Pinout Definition - Power ON/OFF jumper
Connect: auto turn on, short press PWK button to restart
Disconnect: short press PWK button to power on, long press to power off - 1.8V output jumper
Connect: outputs 1.8V externally
Disconnect: used to test power consumption - Module power supply jumper
Connect: DCDC to power the module - GNSS active power supply selection
Connect: enable GNSS active power supply - USB Type-C port
- Main antenna connector
- AUX antenna connector
- GNSS antenna connector
- Battery power supply header
Supports 2.5V-5.5V battery (Note: the board cannot be powered by USB port and battery at the same time)
Pinout Definition Outline Dimensions Resources & Services
PACKAGE CONTENT
Weight:0.193 kg
BG95-M3 Zero x1
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.