WIFI LED APP Pixel SD Card Controller DMX 512 APA102 WS2812B WS2811 WS2801 StripDESCRIPTION
Features:
One port controls maximum 2048 pixels.
You can connect your android phone to H806SB via WLAN to control leds.
H806SB supports dozens of single-line and double-line chips.
You can also use four buttons to set play mode, switch files, increase or decrease speed.
DC5V or DC12~24V input.
Maximum control radius: 25m
Specifications:
Input Voltage: DC 5V~24V
Power Dissipation: 0.3W
Drive Pixels Number: 2048
Control Radius: 25m
Dimension: L150 x W82 x H38
Supported Chips:
LPD6803, LPD8806, LPD1882, LPD1889, LPD6812, LPD1883, LPD1886, DMX512, HDMX, APA102, MY9221, UCS6909, UCS6912, UCS1903, UCS1909, UCS1912, UCS8904, WS2801, WS2803, WS2811, WS2812, TM1803, TM1804, TM1809, TM1812, TM1829, TA9912, TM1913, TM1914, TM1926, TM1814, INK1003, LX1003, LX2003, LX2006, TLS3001, P9813, P9816, SM16711, SM16716, LD151x, LD153x, MBI6021, MBI6023, MBI6024, etc.
Note: H806SB supports more than the chips listed above(some chips have the same sequence diagram, for example UCS2903 has the same sequence diagram with UCS1903, H806SB supports them all).
Workflow:
Assume you have a 32*32 (pixels) WS2812 panel
Step1. Set them up
Step2. Program with LED Build Software
Software Brief Introduction
(1). Place Pixels
(2). Light Setting
(3). Make Effects
you can import video as well
(4). Output controller data and put it into SD card
Assume we\'ve had 6 files in SD card
Install LEDDPF. apk and open it
Click controller name in \"WLAN Set\", connect controller to phone.
Note:
Now you can press these icons to switch program.
Press menu \"settings\" to adjust speed and brightness.
So far, you can switch programs, change speed and brightness with phone.
Step5. Doodle
In this example: 32 pixesl by 32 pixels WS2812 panel
Width and Height: 32
RGB order: RGB(for instance)
Sculpt: Left Bottom vertical snake(for instance)
Step6. Configure Router
Note: before configuring each H806SB to router with phone, make sure your phone has been connected to each H806SB directly
Note the color of \"H806SB\" in the following example, it\'s green, which means phone has been connected to H806SB directly
If you have multiple H806SBs and want to configure them all to router.
For the first H806SB, just connect phone to it directly first, then connect it to router.
For the others, just do the same.
Button operation and indicator lights status:
Power controller on.
With SD card inserted, green light is on and keeps still, red light is flashing.
Without SD card, green and red light are on and all keep still.
Package:
1Pcs WIFI LED Controller
CUSTOMER SATISFACTION
Please don\'t hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
PAYMENT
SHIPPING
* Orders processed within 24-48 hours of payment verification during working days.
* We ship to world wide for every ones convenience,but remote areas and countrys please note the shipping time will take
* Shipping time and Default method:
Terms of Sale
Service Guarantee:
* We pursuit 100% customers satisfaction guarantee,if you have any issue,please just contact us,we will resolve for you.Product Guarantee:
* 12 months Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
* Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS
WITH AN EXPIRED WARRANTY.You agree to all of the above-listed policies upon ordering on !
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.