This item is pre-owned – it will work like newonce programmed to your vehicle (FFS)
One (1)
Aftermarket remote keyless entry fob alarm
Transmitter control clicker keyfob controllerreplacement
Functions at 100% Tested & Guaranteed
Viper
FCC ID: EZSDEI7856
Part #: 7856V
IC ID#: 1513A-7856
Frequency: 907-923 Mhz
LED color: Orange and Green
5 buttons
Battery: (2) CR 2016
Viper\'s 7856V 2-way LED remote works with designated (below) Viper car security and remote start systems. Itreplaces a lost or damaged remote, or gives a second user access to your Viper system. The 7856V offers 2-way communication with compatible Viper systems, andcovers functions like arming and disarming, locking and unlocking, a \"panic\" button, remote starting (if you\'ve had it installed), and auxiliary features (like a trunk release).
Please Note:
A Valet / Programming switch is required to program this remote.
Programming can be difficult if you are not familiar with it. Please read the programming instructions (below) before purchasing. Assistance from an auto specialty shop or locksmith may be needed.
Compatible with the following systems:
This VIPER 7856V remote is also 100% Cross Compatible with all of these other Directed Electronics remotes:
Automate 7856A
Automate 7857A
Clifford 7856X
Clifford 7857X
Python 7856X
Python 7857X
System Part NumberSystem Model NumberDate Code(?)3606V &3806V3606V &3806VAll4606V & 4806V4606V & class=\"MsoNormal\" line-height:normal\" align=\"center\">3606V
3806V
4606V
4806V
5606V
5806V
Programming Instructions:
1a. With UNLOCK ALL option:
Press and release, then press and hold the Programming button
of the XL202 module. The LED flashes slowly.
1b. With DRIVER DOOR PRIORITY UNLOCK option:
Press and hold the Programming button of the XL202 module.
The LED flashes slowly.
2. Hold the Function button on the remote until it emits a long beep
and its LED turns ON solid (approximately 12 seconds).
3. Press and hold the Start button until the remote beeps 3 times and
its LED turns ON solid.
4. Press the Lock button on the remote. Confirmation tones are heard
upon successful programming, and the XL202 LED turns ON
solid for one second, then turns OFF to indicate the pairing was
completed successfully.
5. When programming is finished, release the Programming button
on the XL202.
6. Wait 30 seconds for remote to exit programming. All remote
lights will be off when the programming mode has been exited.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.