Viking RAD-1A Remote Access Device – Line Powered Paging Amp Control with Programmable Security CodeManaging remote access to your paging system or digital announcer shouldn\'t require extra power supplies, complicated wiring, or worry about unauthorized users breaking in. The Viking RAD-1A is a line-powered remote access device that lets authorized users dial in and take control of one-way paging amplifiers, digital announcers, and other audio programs — all secured behind a programmable access code. The RAD-1A answers on the first ring and stays out of the way until it\'s needed. Separate 600-ohm audio and telephone line outputs make it easy to connect to paging amps like Viking\'s CPA-7B or PA-2A, phone systems, dictation equipment, or even broadcast audio sources like radio or church programs. Disconnection is automatic on CPC, call timeout, silence timeout, or busy signal — or the caller can simply dial #7 to end the session. A status LED gives instant visual response, turning off whenever audio is present so you always know what\'s happening at a glance. Because it runs entirely off telephone line power, there are no batteries to replace and no external power adapter to manage. Non-volatile memory keeps all your programmed settings intact even through a power interruption, making this a true set-it-and-forget-it solution for schools, churches, businesses, and security monitoring installations. Our Expert Take: The RAD-1A is a smart fit any time you need centralized, dial-in control of a paging or announcement system across multiple locations without adding infrastructure. The programmable 2-hour call timer and 1–99 second silence timer are particularly useful for unattended audio monitoring setups — the unit will disconnect itself if a call runs too long or goes silent, keeping your phone line free. If you\'re already running Viking paging amplifiers like the CPA-7B or PA-2A, this integrates cleanly as a remote control front-end without requiring a separate controller. Key Features Programmable 6-digit security code and 6-digit access code to prevent unauthorized access Separate 600-ohm audio and telephone line outputs for connection to paging amps, digital announcers, or phone systems Answers on the first ring; disconnects on CPC, call timeout, silence timeout, busy, or by dialing #7 Programmable 2-hour call timer and 1–99 second silence timer for automatic disconnection Status LED turns on when unit is active and turns off to indicate presence of audio Auxiliary dry contact closure output activates whenever the unit\'s output is active Provides a 500ms hookswitch flash to access additional features without hanging up and redialing Alternate screw terminal connection for phone line output Non-volatile memory — no batteries required Telephone line powered — no external power supply needed Technical Specifications Power: Telephone line powered (24VDC / 20mA minimum) Audio Loss (Through Unit): 1 dB Relay Contact Ratings: 0.5A @ 125VAC / 1A @ 30VDC Connections: (2) RJ11 modular jacks, 7-position screw terminal strip Dimensions: 5.25″ x 3.5″ x 1.75″ (133mm x 89mm x 44mm) Operating Temperature: 32°F to 90°F (0°C to 32°C) Humidity: 5% to 95% non-condensing Shipping Weight: 2.5 lbs (1.13 kg)
Managing remote access to your paging system or digital announcer shouldn\'t require extra power supplies, complicated wiring, or worry about unauthorized users breaking in. The Viking RAD-1A is a line-powered remote access device that lets authorized users dial in and take control of one-way paging amplifiers, digital announcers, and other audio programs — all secured behind a programmable access code.
The RAD-1A answers on the first ring and stays out of the way until it\'s needed. Separate 600-ohm audio and telephone line outputs make it easy to connect to paging amps like Viking\'s CPA-7B or PA-2A, phone systems, dictation equipment, or even broadcast audio sources like radio or church programs. Disconnection is automatic on CPC, call timeout, silence timeout, or busy signal — or the caller can simply dial #7 to end the session. A status LED gives instant visual response, turning off whenever audio is present so you always know what\'s happening at a glance.
Because it runs entirely off telephone line power, there are no batteries to replace and no external power adapter to manage. Non-volatile memory keeps all your programmed settings intact even through a power interruption, making this a true set-it-and-forget-it solution for schools, churches, businesses, and security monitoring installations.
Our Expert Take: The RAD-1A is a smart fit any time you need centralized, dial-in control of a paging or announcement system across multiple locations without adding infrastructure. The programmable 2-hour call timer and 1–99 second silence timer are particularly useful for unattended audio monitoring setups — the unit will disconnect itself if a call runs too long or goes silent, keeping your phone line free. If you\'re already running Viking paging amplifiers like the CPA-7B or PA-2A, this integrates cleanly as a remote control front-end without requiring a separate controller.
Key Features
- Programmable 6-digit security code and 6-digit access code to prevent unauthorized access
- Separate 600-ohm audio and telephone line outputs for connection to paging amps, digital announcers, or phone systems
- Answers on the first ring; disconnects on CPC, call timeout, silence timeout, busy, or by dialing #7
- Programmable 2-hour call timer and 1–99 second silence timer for automatic disconnection
- Status LED turns on when unit is active and turns off to indicate presence of audio
- Auxiliary dry contact closure output activates whenever the unit\'s output is active
- Provides a 500ms hookswitch flash to access additional features without hanging up and redialing
- Alternate screw terminal connection for phone line output
- Non-volatile memory — no batteries required
- Telephone line powered — no external power supply needed
Technical Specifications
- Power: Telephone line powered (24VDC / 20mA minimum)
- Audio Loss (Through Unit): 1 dB
- Relay Contact Ratings: 0.5A @ 125VAC / 1A @ 30VDC
- Connections: (2) RJ11 modular jacks, 7-position screw terminal strip
- Dimensions: 5.25″ x 3.5″ x 1.75″ (133mm x 89mm x 44mm)
- Operating Temperature: 32°F to 90°F (0°C to 32°C)
- Humidity: 5% to 95% non-condensing
- Shipping Weight: 2.5 lbs (1.13 kg)
×
Buy now and save! Tell a friend Visit store Watch now Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like Algo 3228 Station Port FXS Doorphone – Hands-Free Secure Entry Intercom for Door Yeastar 2 FXO Ports Grandstream GXP2130 v2 IP Phone Grandstream GXP1630 IP Phone Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© The Telecom Spot
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
Returns
Returns are accepted
Items must be returned within 30 days of the sale ending
Buyer will pay for return shipping.
Additional Information: Unless otherwise stated in description, returns are accepted within 30 days from date of invoice. A RMA number must be requested before returning any tiems. Merchandise must be in its original condition, unopened and unuséd. Sales on software and licenses are final and not eligible for refund. Buyer is responsible for return shipping, and all returns are subjected to a 20% restocking fee. If the RMA procedures are not followed we may in our sole discretion reject the entire return or choose to impose additional charges against the customer for replacement of the missing item(s). Refunds will be given as merchandise credit. integration by
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.