DevPurple - Ultimate KiCad Pack DEVPURPLE
Premium Software Collections
ULTIMATE KICAD PACK
KiCad, the open source electronics design suite, in every build the KiCad project publishes for Windows, macOS and Linux, with the complete source archive and every manual the KiCad project publishes as a PDF, on one disc or drive.
KiCad takes an electronics design from the first sketch of a schematic through to the files a board fabricator asks for. The schematic editor works from a single sheet up to a hierarchical design of many sheets, with an electrical rules checker and an integrated SPICE simulator beside it. The PCB editor places the parts and routes the tracks with an interactive router and a design rules checker, and the 3D viewer turns the finished layout into a model you can rotate and inspect, with a raytracer for a realistic image of the board. The Gerber viewer opens a set of Gerber and drill files layer over layer, the PCB calculator works the arithmetic that goes with a board, the page layout editor sets up the drawing sheet and its title block, and the command line interface drives the whole suite from a script.
What You Can Do With It
- Draw the schematic: the schematic editor takes a design from a single sheet to a hierarchical set of many sheets, with the KiCad symbol library and your own symbols beside it.
- Check the circuit as you draw it: an electrical rules checker reports what the drawing has wrong, and an integrated SPICE simulator shows what the circuit does before a board is ever made.
- Lay out the board: the PCB editor places the parts and routes the tracks with an interactive router, a design rules checker, and highlighting that shows what an edit will touch.
- See the board before it is built: the 3D viewer turns the layout into a model to rotate and inspect, and its raytracer writes a realistic image of the finished board.
- Send the board to a fabricator: the PCB editor plots the Gerber and drill files a board house asks for, with the layers and the units you choose.
- Read a set of Gerber files: the Gerber viewer opens Gerber and drill files together and shows the layers over one another, which is how a design is checked against what a supplier will make.
- Work the numbers: the PCB calculator handles the arithmetic that goes with a board, including track width against current, via size, and electrical spacing.
- Set up the drawing sheet: the page layout editor defines the border, the title block and the fields printed on every sheet of the design.
- Drive it from a script: the command line interface exports, plots, checks and converts a design without opening a window, for batch work and for automated builds.
- Keep your own parts: the symbol editor and the footprint editor make new parts, and the library tables decide which libraries a design uses.
The Builds In This Pack
- Windows 10 and 11, 64-bit Intel or AMD: the official installer.
- Windows 10 and 11 on arm64: the official native installer.
- Mac, Intel and Apple Silicon: one official universal disk image carrying both processor builds in the one file.
- Linux, 64-bit Intel or AMD: the official AppImage, in the tar the KiCad project publishes it in. It is the full build, which includes the 3D packages.
- Any system: the complete source archive, and the manual set.
- Five files for three systems. You need the one that matches your machine, and the Read Me lists them with the machine each one is for.
The KiCad project\'s macOS download page states that the current stable release is supported on macOS 12 and newer. Its system requirements page takes a different line, describing the supported macOS versions as the ones Apple currently supports, counted as the three most recent major releases, and it lists macOS 13.x as having reached the end of support. The libraries inside the disk image itself declare macOS 14.0 as the highest floor anywhere in it, and that is the figure to work to. The two published figures come from the KiCad project\'s own pages and the third comes from the build it published, so all three are recorded here, and a Mac on macOS 14 Sonoma or newer is the one to use.
Which Build Fits Which Computer
- Windows 10 or 11, Intel or AMD: kicad-10.0.6-x86_64.exe. This is the one most people want.
- Windows 10 or 11 on arm64: kicad-10.0.6-arm64.exe. Open Settings, then System, then About, and read System type if you are unsure.
- Mac: kicad-unified-universal-10.0.6.dmg, which is right for an Intel Mac and for an Apple Silicon Mac.
- Linux on Intel or AMD: kicad-10.0.6-x86_64.AppImage.tar, which holds the AppImage. Extract the tar, mark the AppImage inside it as executable, and run it.
- The source code: kicad-10.0.6.tar.gz.
The Manuals In This Pack
- Nine manuals in English: the introduction, Getting Started, the KiCad suite itself, the Schematic Editor, the PCB Editor, the Gerber Viewer, the PCB Calculator, the Page Layout Editor and the Command Line Interface.
- Getting Started in ten further languages: Catalan, German, Spanish, French, Indonesian, Italian, Japanese, Polish, Russian and Chinese Simplified.
- Published by the KiCad project as finished PDF files, so they open on the computer with nothing to install and no connection to make.
System Requirements
- Operating system: Windows 10 or 11, macOS 14 Sonoma or newer, or 64-bit Linux on Intel or AMD.
- Processor: a 64-bit Intel or AMD processor, or an arm64 processor. On a Mac, an Intel processor or an Apple Silicon chip.
- Memory: the KiCad project gives 1 GB as the minimum and more than 2 GB as the recommended figure.
- Disk space: the KiCad project gives up to 10 GB of available hard disk space.
- Screen: the KiCad project notes that a 1280 by 1024 screen works, and recommends a full high definition screen or higher.
- Administrator rights: needed to run the Windows installer. The macOS image and the Linux AppImage need none.
- No internet connection needed for the program or for the manuals on the media.
The figures above are the ones the KiCad project publishes on its own system requirements page. The Windows download page adds that KiCad supports Windows 10 and 11.
What\'s Included
- One Physical Media: Your choice of a Premium USB Drive or DVD, pre-loaded with the complete pack
- Windows 10 and 11, Intel or AMD: the official 64-bit installer for the current stable release
- Windows 10 and 11 on arm64: the official native installer
- Mac, Intel and Apple Silicon: the official universal disk image, carrying both processor builds in the one file
- Linux, 64-bit Intel or AMD: the official AppImage, in the tar the KiCad project publishes it in, running the full build that includes the 3D packages
- The Complete Source Code: the source archive of the release on this pack
- Nine Manuals in English: the introduction, Getting Started, the KiCad suite, the Schematic Editor, the PCB Editor, the Gerber Viewer, the PCB Calculator, the Page Layout Editor and the Command Line Interface, all as PDF files
- Getting Started in Ten Further Languages: Catalan, German, Spanish, French, Indonesian, Italian, Japanese, Polish, Russian and Chinese Simplified, all as PDF files
- Setup Notes: a Read Me covering which file to pick, and the steps for each system
Shipping & Delivery
- Fast Processing: Orders typically ship within 1-2 business days
- Tracked Shipping: Delivery confirmation included on all orders
- Secure Packaging: Your disc or drive arrives protected and ready to use
- Worldwide Shipping Available: Check listing for rates and estimated delivery times
Satisfaction Guarantee
If there is an issue with your order, contact us and we will make it right (including replacements for defective media).
Why Buy From Dev Purple? Three Systems Covered
Windows, macOS and Linux, with the correct build supplied for each, including arm64 Windows and a Mac image that carries both processor types in one file.
The Complete Manual Set, Included
Every manual the KiCad project publishes as a PDF travels on the media, nine of them in English, with Getting Started in ten further languages.
The Source Code, Included
The source archive of the release on this pack is on the media, which is what the GNU General Public License asks a distributor to provide.
Official Releases
Every installer, disk image, AppImage and source archive here is the official release from the KiCad project, taken from its own download pages.
No Subscription
KiCad is open source under the GNU General Public License version 3, with no monthly fee, no product key and no expiry.
Offline By Design
The manuals travel on the media, so the reference for every part of the suite is on the computer with no connection needed.
Compliance
This listing complies with \'s software policy. This is a lawful compilation of redistributable software. No paid, commercial, or copyrighted software is included. Every program fits one of these categories:
- GPL licensed: The KiCad project\'s own license page states that the majority of KiCad\'s source code is developed and distributed under the GNU General Public License version 3 or greater, and that license explicitly grants anyone the right to copy, distribute, and redistribute the software in any medium, provided the license terms are preserved. This is a core feature of copyleft licensing. The KiCad project also publishes the source code for every release, and the source archive for the current release is included on the media.
- Official releases, unmodified: Every file on the media is the official release as published by the KiCad project, unchanged. Nothing has been patched, cracked, or rebuilt.
- Third party components: The KiCad project records that additional permissive licenses, such as the MIT License, are also present in its code base. The KiCad project publishes the complete and up to date details in the source code it distributes, and that source archive is on the media.
The KiCad name is used here to refer to KiCad itself. This pack is an independent compilation and is not endorsed by or affiliated with the KiCad project. The software box shown in any product images is a display image only and is not included. You receive the media only.
\'s Verified Rights Owner (VeRO) program targets listings that infringe intellectual property. This listing does not fall into that category because the GNU General Public License already authorizes the copying and redistribution being done here. Buyers receive only the rights the original license grants.
Frequently Asked Questions
How is this item delivered?
This is a physical item (USB drive or DVD) that will be shipped to you. Choose your format when you order.
Which build should I install?
On Windows 10 or 11 with an Intel or AMD processor, use kicad-10.0.6-x86_64.exe. On a Windows machine with an arm64 processor, use kicad-10.0.6-arm64.exe. On a Mac, use kicad-unified-universal-10.0.6.dmg, which suits both Intel and Apple Silicon. On Linux, extract kicad-10.0.6-x86_64.AppImage.tar, mark the AppImage inside it as executable and run it. The Read Me on the media repeats this list, and tells you how to check which machine you have.
Are the manuals included?
Yes. Every manual the KiCad project publishes as a PDF is on the media: nine of them in English, covering the introduction, Getting Started, the KiCad suite, the Schematic Editor, the PCB Editor, the Gerber Viewer, the PCB Calculator, the Page Layout Editor and the Command Line Interface, plus Getting Started in Catalan, German, Spanish, French, Indonesian, Italian, Japanese, Polish, Russian and Chinese Simplified.
Is the source code included?
Yes. The source archive of the release on this pack is on the media, taken from the KiCad project\'s own repository. The GNU General Public License asks a distributor to make the source available, and it is here.
Which Macs does it cover?
One universal disk image carries a native build for an Intel Mac and a native build for an Apple Silicon Mac, so there is no second file to choose between. The KiCad project\'s macOS download page states that the current stable release is supported on macOS 12 and newer, and its system requirements page describes support as covering the macOS versions Apple currently supports.
Does the Windows version need anything installed first?
No. The KiCad installer carries what it needs, so a Windows machine with no internet connection can be set up from the media alone.
Does this software need a product key or activation?
No. KiCad is open source, and the KiCad project\'s own license page states that the majority of its source code is distributed under the GNU General Public License version 3 or greater, so there is no product key, no activation step, no registration, and no account.
Can I use the design files it produces with other software?
Yes. The PCB editor plots the Gerber and drill files a board fabricator asks for, and the Gerber viewer opens a set of Gerber and drill files so a design can be checked against what a supplier will make. Designs themselves are saved in the KiCad project\'s own file formats.
Do I need to copy the pack to my computer first?
For DVD orders, copy the pack folder to your computer (for example, your Desktop) first, then run the installer from there. DVDs have much slower read speeds than USB drives, and a DVD install run directly from the disc will be slow.
Important Notes
- This is a PHYSICAL ITEM (USB DRIVE OR DVD) that will be shipped to you. Choose your format when you order.
- Windows, macOS, and Linux are all covered, with a native build supplied for both Mac processor types, plus arm64 Windows.
- The complete manual set is on the media, nine manuals in English and Getting Started in ten further languages, all as PDF files.
- The source archive is on the media, which is what the GNU General Public License asks a distributor to provide.
- Contact us with any questions before or after your purchase.
Thanks for Shopping with DevPurple!
Your premium software collection is here.
© 2026 DevPurple. All rights reserved.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.