|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
USB Blaster V2 ALTERA CPLD FPGA Download Cable Programmer Debugger + USB + JTAG
$50.59

DESCRIPTION Waveshare USB Blaster V2 Download Cable, Compatible With ALTERA USB Blaster FPGA/CPLD Programmer, High-Speed FT245+CPLD Solution Description Waveshare USB Blaster V2 Download Cable, compatible with ALTERA USB Blaster FPGA/CPLD programmer. The USB Blaster Download Cable interfaces a USB port on a host computer to an Altera FPGA mounted on a printed circuit board. The cable sends configuration data from the PC to a standard 10-pin header connected to the FPGA. You can use the USB Blaster cable to iteratively download configuration data to a system during prototyping or to program data into the system during production. It surpports most of the ALTERA FPGA/CPLD devices, Active Serial Configuration devices, Enhanced Configuration devices, and supports AS, PS, JTAG three download modes. Key Features - Hardware Solution
- High speedFT245+CPLD+244solution, similar download speed as the original ALTERA USB Blaster, with the same operation.
- Download speed 1-3 times faster than other schemes, such as 68013 or C8051F.
- Performance
- Supports most of the ALTERA FPGA/CPLD devices, Active Serial Configuration devices, and Enhanced Configuration Devices.
- Supports AS, PS, JTAG three download modes.
- High-speed, stable, and internal FT245R+CPLD designed.
- Supports 1.2-5V programming voltage.
- Supports Nios II of embedded processor communication and debugging.
- Supported Softwares
- Quartus II integrated development environment.
- NIOS II IDE integrated development environment.
- NIOS II EDS integrated development environment.
- Supported Devices
Tested devices are listed below, including but not limited to: - CPLD: MAX3000, MAX7000A/B/S, MAX9000 and MAX II etc.
- FPGA: Stratix, Stratix II, Cyclone, Cyclone II, CycloneIII, ACEX 1K, APEX 20K and FLEX 10K etc.
- Active Serial Configuration Devices including: EPCS1, EPCS4, EPCS16 etc.
- Enhanced Configuration Devices including: EPC1, EPC4 etc.
- Connects to PC
- Computer connection via USB 2.0 interface.
- Connects to target board
- Target board connection via JTAG, AS, PS interfaces. The figure 1, 2,and 3 below shows the header pinouts of different interfaces.
Figure 1.JTAG header pinout Figure 2.AS header pinout Figure 3.PS header pinout LED Status - Red LED: Power indicator
- Green LED: Signal indicator, the LED is on while downloading/programming
Downloads Development resources:user manual, software, etc. Wiki:[link removed by ] PACKAGE CONTENT Weight:0.102 kg - USB Blaster V2 × 1
- USB Cable × 1
- 10-pin cable × 1

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|