HP-7200-APP Multimeter Specification: 【Remotely Monitoring on Your Phone】Built-in wireless connectivity can auto connect to your Android / Apple phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later. 【AC DC Clamp Amp Voltmeter NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC.【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min/Avg on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full.【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1 ~ 60A AC DC current, 1A for 60 ~ 400A to support accurate amp reading, this clamp amp probe meter is more user-friendly for daily current measurement, such as troubleshooting car, boats battery.【Clamp On Live Wire for Measurement】To measure amp with this clamp meter, you MUST separate the hot and neutral conductors, and clamp around only LIVE wire for measurement otherwise they will cancel each other out and give a zero amp reading. The most convenient way without peeling the cord is clamp on an AC Line Splitter.Hp-7200-App Multimeter Feature Function:
- DC Current: 60A/400A ±(2.5% / 3.0% +10 digits)
- AC Current: 60A/400A ±(2.5% / 3.0% +10 digits)
- AC Voltage:6V/60V/600V ±(1.0% ~ 1.5% +3 digits)
- DC Voltage: 600mV/6V/60V/600V( +/- 0.5% ~ 0.8% + 2 digits)
- Resistance: />
- Capacitance: />
- Frequency: />
- Duty cycle:0.1%~99.9% ; Temperature Test: -4 ~ 1832 ℉
- Data Hold: Yes
- Diode Test: Yes
- MAX/MIN/AVG: Yes
- Front LED Lamp: Yes
- Backlight Display: Yes
- Overload Protection: Yes
- Temperature Test (℃/℉): Yes
Product List:
1 x 7200-APP Clamp Meter 1 x User Manual
2 x Test Leads (Pair)
1 x Small Screwdriver
1 x Temp Probe
Hp-7200A 2000 Counts Current Clamp
➤True RMS clamp multimeter: The AC voltage and current measurement of the AP-7200A current clamp is a true RMS measurement that is more accurate for various waveform signals. Jaw size: 26MM.
➤ Non-Contact Voltage (NCV) Detection: With the NCV function of the BT-7200A multimeter, you can easily detect and recognize if there is electricity in the cable without touching or breaking the cable or risking electric shock.
➤Multi-Function Auto Range Clamp Meter: This portable clamp meter supports auto range selection, flashlight, function selection dial, data storage, max/min data, LCD display, backlight, auto power off, battery level indicator, over range, NCV, diode test and continuity buzzer.
➤Wide applications: The clamp tester is compact, easy to use, convenient to carry and has low power consumption. It is ideal for car maintenance, laboratory use, household appliance repair and electrical measurement.
General Specifications (7200A):
Maximum display: 1999
Sampling rate: 2 to 3 times per second
Over-range: display \"OL\" or \"-OL\"
Measurement principle: double integral A/D conversion
Working environment: temperature 0~40℃, relative humidity ≤80%
Storage environment: temperature -20~60℃, relative humidity ≤90%
Power supply: Two AAA batteries
Dimensions: 207 (H) × 75 (W) × 37 (D) mm
Weight approx. 280g (including battery)
Maximum clamp head opening size: 26 mm
DC voltage:
200mV/2V /20V ±(0.5% of measured value + 2 digits)
20V /600V ±(0.8% of measured value + 2 digits)
AC voltage (true RMS):
2V / 20V ±(1.0% of measured value + 3 digits)
200V ~ 600V ±(1.5% of measured value + 3 digits)
AC current (true RMS):
20A /200A ±(2.5% of reading + 10 digits)
400A ±(3.0% of reading + 10 digits)
Resistance:
0Ω ~ 200Ω ±(1.0% of reading + 3 digits)
2KΩ ~ 2MΩ ±(1.0% of reading + 2 digits)
2MΩ ~ 20MΩ ±(1.5% of reading + 3 digits)
Non-contact Voltage Detection:
NCV detection range: 90V (1000V AC rms)
When an AC voltage signal is detected, the flashlight lights up and the buzzer sounds.
Package list:
2 X Test Leads
1 X User Manual
1 X HP-7200A Hand-held Clamp Meter
7200BClamp Meter Description:
⚡⚡⚡HP-7200B TRMS Clamp Meter 6000 Counts
➤【Multifunction Clamp Meter】 6000 Counts Auto-range AC/DC amps clamp multimeter with the DC Voltage range:600mV~600V, AC Voltage range:6V~600V, AC/DC Current: 60A~400A; Resistance:600Ω~60MΩ; Ideal Non-contact ampere multimeter to troubleshoot electrical problems in automotive, household, HVAC, vehicle boat motor diagnosis.
➤【True-RMS Clamp Meter】 This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests in ℃. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
➤【NCV Detection Function】Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the left side of the rotary switch. Simply place your thumb on it and push.
➤【Accuracy AC DC AMP Meter】 This clamp meter with the AC/DC Current Range : 60A~400A; and it provides meaning full measurements at 0.1A or above. So you no need to worry to measure the low current readings; Note that for low-current measurements one can loop the wire around the jaw multiple times, multiplying the reading by the number of turns.
➤【Safety Guarantee】 Safety standard IEC 61010-1, CAT III 600V. Double insulation. 48 Months product warranty provided. 7/24 Customer Service. If you have any problems with our product, just contact us, and we will solve the problems for you ASAP.
7200B Technical Specifications:
1. DC Voltage: *600mV/6V/60V ±(0.5%+2) *600V ±(0.8%+2)
2. AC Voltage: *6V/60V ±(1.0%+3) *600V ±(1.5%+3)
3. DC Current: *60A ±(2%+10) *400A/10A ±(3.0%+10)
4. AC Current: *60A ±(2%+10) *400A ±(3.0%+10)
5. Resistance: *600Ω ±(1.0%+2) *60MΩ ±(1.5%+3)
6. Frequency: ±(0.1%+5)
7. Power Supply: 2*1.5V(AA) Battery(not included in packaged)
8. Safety Class: IEC 61010-1, CAT II 600V
9.Capacitance:6nF/60uF ± (5.0%+ 10) 60nF/600nF/6uF ± (3.0%+ 10) 600uF/6mF/60mF ±(10%+20)
10.Duty Cycle:0.1%-99.9%( ±2.0% of rdg+2 digits)
11.Temperature:-20-150 Resolution:1 ℃/1℉,NiCr-NiSi K-type sensor, Overload protection: 250V DC or AC rms
Product Feature(7200B):
✔Diode Test
✔ Data Hold
✔ Continuity
✔ Backlight
✔ AC DC Current
✔ AC DC Voltage
✔ Relative Value
✔ Auto Power Off
✔ Temperature ℃
✔ Non Contact AC Voltage Switches
The digital voltage clamp meter with clearly marked function buttons, for you quickly understand how to use it and satisfy all your needs of measuring.
Temperature Measurement
Place the temperature probe directly touch the object to be measured, the voltage amperage tester will display the temperature(℃/℉) value on the LCD screen.
Non-Contact Voltage Detection
This electric multi-clamp meter built-in non-contact voltage detector beeps if detecting a complete circuit. Just need to place the voltmeter near the test object.
Auto Power Off
The clamp multimeter will automatically shut down to save battery power if there is no operation within 15 minutes. Feature on low battery indication, you can replace the battery in time.
With Flashlight & Backlight
Equipped with a large LCD backlit and flashlight, the smart current clamp meter can easier get clear measuring in dimly light environments. User-friendly designs also protect your safety.
Correct Measurement
To measure AC current by clamping the meter around one line or one kind of wire; you should make sure not the whole power cord, otherwise the clamp multimeter displays 0 A.
Package Contents:(HP-7200B)
2 x Test Lead
1 x User Manual
1 x Temperature Probe
1 x 7200B Digital Multimeter
7200 Series Clamp Meter Voltage
200mV ~ 20V ±(0.5% of rdg + 2 digits)
20V ~ 600V ±(0.8% of rdg + 2 Voltage(True RMS)
2V ~ 20V ±(1.0% of rdg + 3 digits)
20V ~ 600V ±(1.5% of rdg + 3 digits)
6V/60V ±(1.0%+3) *600V ±(1.5%+3)6V/60V ±(1.0%+3) *600V ±(1.5%+3)DC CurrentNO60A ±(2%+10) *400A±(3.0%+10)60A ±(2%+10) *400A±(3.0%+10)AC Current(True RMS)
20A ~ 200A ±(2.5% of rdg + 10 digits)
200A ~ 400A ±(3.0% of rdg + 10 digits)
60A ±(2%+10) *400A±(3.0%+10)60A ±(2%+10) ~ 200Ω ±(1.0% of rdg + 3 digits)
2KΩ ~ 2MΩ ±(1.0% of rdg + 2 digits)
2MΩ ~ 20MΩ ±(1.5% of rdg + 3 digits)
600Ω ±(1.0%+2) *60MΩ ±(1.5%+3)600Ω ±(1.0%+2) *60MΩ ±(0.1%+5)99.999Hz~9.999MHz ±(0.1%+5)Duty CycleNO0.1%~99.9%: ± ( 2.0% of rdg + 2 digits )0.1%~99.9%: ± ( 2.0% of rdg + 2 digits )TemperatureNO-20-150
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.