The Focusrite Scarlett Solo (3rd Gen) is a compact, bus-powered 2-in/2-out USB-C audio interface built for solo musicians, podcasters, and content creators. It captures studio-grade audio at up to 24-bit / 192 kHz resolution
Audio Resolution 24-bit / 192 kHz (44.1 kHz to 192 kHz sample rates)
Rear Outputs Two balanced 1/4-inch TRS line outputs for studio monitors
Power & Data Single USB 2.0 Type-C port (bus-powered; no external power supply needed)
Dynamic Range 111 dB (Mic input) / 110 dB (Instrument input)
Gain Range 56 dB on both inputs
Dimensions & Weight 5.65 x 1.71 x 3.77 in (0.71 lb / 320 g)
Inputs & Controls (Front Panel)
• XLR Microphone Input: Features a 3rd-generation Scarlett mic preamp with a 48V phantom power switch for condenser microphones.
• Air Mode: A dedicated AIR button adds high-frequency clarity and presence by modeling Focusrite's classic ISA studio preamps.
• 1/4-Inch Instrument / Line Input: Accepts electric guitars, basses, or synthesizers. The INST button switches the input to high-impedance mode to prevent clipping from hot guitar pickups.
• Gain Halos: Light rings around both gain knobs glow green for good signal, amber when close to clipping, and red if the signal distorts.
.• Direct Monitor & Output: A DIRECT MONITOR switch routes your input straight to your headphones for zero-latency tracking. The large MONITOR knob controls the volume for both the front 1/4-inch headphone jack and rear speaker outputs simultaneously.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.