THE COLONNADE SET: cooling stand and matching faceplate for the Valve Steam Machine
The Colonnade stand and its faceplate together, for less than the two bought separately, both printed in white marble PLA. The stand lifts the machine 57 mm so its intake can breathe, and the faceplate puts a carved Roman panel on the front of the machine.
The stand
A straight-sided plinth with a Roman arcade cut through all four faces: five round arches a side on square piers, a keystone over each one, a base moulding underneath and a cornice under the machine. Every arch goes clean through, so air comes in from all four sides and feeds one hollow chamber that runs straight up to the machine\'s intake.
The machine sits down into a 3 mm recess and rests on a ledge inside, held by its own weight. No screws or clamps.
The faceplate
The carved storey above the arcade. An egg-and-dart frame, an acanthus scroll, and a laurel wreath round a shield carrying a winged Gorgon\'s head with snakes in her hair.
It goes on where Valve\'s plate goes: pull the stock plate off and press this one on. Four stacks of two magnets sealed inside it meet the machine\'s own four steel points. No tools, nothing to modify.
Specs
- Stand: 185 x 191 mm on the desk, 60 mm tall, lifts the machine 57 mm
- Faceplate: 156 x 126 mm, the size of Valve\'s plate
- PLA in white marble: matte, stone-look, with fine grey flecks
- Fits the Valve Steam Machine (2026)
Only want one?
The stand and the faceplate are each listed on their own too. Look for \"Colonnade\" in my other items.
In the box
One Colonnade stand and one Colonnade faceplate. The Steam Machine is not included.
Printed to order, one at a time, so you will see faint layer lines. The flecks fall differently on every print. Dust them with a soft brush.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.