Electronics for IoT, Prototyping & DIY
PJRC Teensy 4.1 -- 600MHz ARM Cortex-M7 Microcontroller Development Board with Ethernet, SD Card & USB Host
Standard Version With and Without Soldered Pins, Lockable Version Without Pins
The Teensy 4.1 is PJRC\'s flagship development board, featuring a 600 MHz ARM Cortex-M7 processor with 8MB of flash memory and 1MB of RAM. It packs built-in 10/100 Mbit Ethernet, a microSD card socket, a USB host port, and 55 I/O pins into a compact 2.4 × 0.7 inch breadboard-friendly form factor. Fully compatible with the Arduino IDE, it delivers the raw performance and connectivity that other microcontroller boards simply can\'t match.
⚠️ Important: All digital and analog pins operate at 3.3V. The pins are not 5V tolerant. Do not apply more than 3.3V to any I/O pin.🔧 Available VariantsMODELVariantBest ForTEENSY41Standard, with no pinsPrototyping, experimentation, learningTEENSY41_SPStandard, with pins soldered to the boardPrototyping, experimentation, learningTEENSY41_LOCKLockable, with no pinsCommercial products, secure applications
The Lockable variant supports PJRC\'s Code Security features, including encrypted firmware updates, program memory protection, and JTAG disable -- ideal for commercial products where intellectual property protection is critical.
⚡ Key Features
- 600 MHz ARM Cortex-M7 Processor -- Dual-issue superscalar architecture executes two instructions per clock cycle, delivering performance many times faster than typical 32-bit microcontrollers
- 8MB Flash + 1MB RAM -- Four times the flash of the Teensy 4.0, with 512K of tightly coupled RAM for single-cycle access
- Hardware Floating Point (32 & 64-bit) -- Full hardware acceleration for both single and double precision math at native speed
- Built-in 10/100 Mbit Ethernet -- Onboard DP83825 Ethernet PHY chip (RJ45 connector kit sold separately)
- MicroSD Card Socket -- Fast 4-bit native SDIO for high-speed data logging and file storage
- USB Host Port (480 Mbit/s) -- Connect USB keyboards, mice, MIDI controllers, and other devices directly to the board
- 55 Digital I/O Pins -- 42 breadboard-friendly, with 35 PWM outputs and 18 analog inputs
- Extensive Communication -- 8 serial ports, 3 SPI, 3 I2C, 3 CAN Bus (1 with CAN-FD), 2 I2S/TDM + S/PDIF digital audio
- Expandable Memory -- Two QSPI locations on the bottom for optional PSRAM (up to 16MB) or additional flash
- Real-Time Clock (RTC) -- Dedicated 32.768 kHz crystal; add a CR2032 coin cell to maintain time while powered off
- Overclockable to 912 MHz -- Push beyond the rated speed for projects that demand maximum performance
- 32 DMA Channels -- Hardware-accelerated data transfer for audio, LEDs, displays, and more
- Cryptographic Acceleration & Random Number Generator -- Built-in hardware security features
📐 SpecificationsProcessorNXP IMXRT1062 (ARM Cortex-M7)Clock Speed600 MHz (overclockable to 912 MHz)Floating Point UnitHardware 32-bit & 64-bitFlash Memory8 MB (7936K usable for programs)RAM1024K (512K tightly coupled)EEPROM4284 bytes (emulated)Digital I/O Pins55 total (42 breadboard-friendly)PWM Outputs35Analog Inputs18Serial Ports8 (all with FIFOs)SPI / I2C / CAN3 SPI / 3 I2C / 3 CAN (1 with CAN-FD)USBDevice (480 Mbit/s) + Host (480 Mbit/s)Ethernet10/100 Mbit with DP83825 PHYSD CardMicroSD socket (4-bit SDIO)Digital Audio2× I2S/TDM + 1× S/PDIFDMA Channels32Operating Voltage3.3V (onboard regulator from 5V USB/VIN)I/O Voltage3.3V (not 5V tolerant)Power Consumption~100 mA at 600 MHzBoard DimensionsApprox. 61 × 18 mm (2.4 × 0.7 inches) L × WRegulatoryFCC, ISED, CE, UKCA, RoHS, REACH compliant 📦 What\'s in the Box
- 1x Teensy 4.1 Development Board (variant as selected)
- 1x Pinout Reference Card
USB cable, Ethernet connector kit, and PSRAM chips are not included. The Ethernet connector kit and PSRAM chips are optional, and are not required for operation.
🛒 What You\'ll Need
- USB Micro-B Cable -- For programming and power
- Header Pins (2x 24-pin) -- For breadboard use (soldering required)
- Ethernet Kit (RJ45 MagJack) -- Required to connect an Ethernet cable (if using Ethernet)
- Soldering Iron -- For attaching header pins and optional accessories
🔌 Compatible With
- Arduino IDE (with Teensyduino boards add-on)
- PlatformIO (Windows, Mac, Linux)
- Visual Micro for Visual Studio (Windows)
- CircuitPython (partial hardware support)
- PJRC Audio Shield (Rev D)
- SmartLED Shield v5 for HUB75 RGB LED panels
- Standard solderless breadboards
🎯 Typical Applications
- Multi-channel audio processing and synthesis
- Large-scale addressable LED installations (WS2812B / NeoPixel)
- High-speed data logging to SD card
- Networked IoT devices and Ethernet-connected controllers
- CAN Bus automotive and industrial control
- Custom USB HID devices -- keyboards, MIDI controllers, joysticks, flight sim panels
- Real-time signal processing and DSP
- Robotics and multi-axis motor control
- DMX lighting control
- Commercial embedded products (Lockable variant available)
⚠️ Important Notes
- All I/O pins are 3.3V only -- do not apply more than 3.3V to any pin
- Header pins are not pre-soldered -- soldering is required for breadboard use
- The Ethernet PHY chip is onboard (standard variant), but the RJ45 connector kit is sold separately
- Multiple variants are available: Standard or Lockable, with or without Ethernet chip -- check the listing variation before purchasing
- The Lockable variant supports encrypted firmware updates and code security for commercial applications
💡 Tip: Visit the Envistia Mall support website for a complete User Guide with wiring diagrams, getting-started instructions, and links to PJRC\'s full technical documentation and community support forums. 🏪 About Envistia Mall
Envistia Mall is a US-based electronics retailer specializing in development boards, sensors, modules, and components for makers, engineers, and educators. We ship from the United States with fast handling times. Product documentation and technical support are available at our dedicated support site.
📦 Fast Free US Shipping | 🔄 Hassle-Free Returns | 📧 Responsive Customer Support
Visit our store for compatible Teensy accessories, including header pins, optional PSRAM memory chips, Ethernet kits, Audio Shields, and more.
Featured Products
PJRC Teensy 4.0 iMXRT1062 Microcontroller Development Board Unlocked & Lockable
$24.80
WeMos D1 CH340 WiFi Arduino UNO R3-Compatible Development Board ESP8266 ESP-12F
$9.49
Arduino Uno R3 Compatible Board ATmega328P CH340 USB + Cable - USA Seller
$9.89
Teensy 4.1 ARM Cortex-M7 Microcontroller Development Board w/ & w/o Ethernet
$34.60
Arduino Uno R3 Compatible Board ATmega328P CH340 USB - Board Only - USA Seller
$9.49
CD74HC4067 16 Channel Analog Digital Multiplexer MUX Breakout Board Module US
$6.29
NodeMcu V3 LUA WeMos Compatible 32Mb Flash 340G ESP8266 IoT Development Module
$7.29
ATTINY88 Micro Development Board 16Mhz / Digispark ATTINY85 Upgrade for Arduino
$6.89 Add suggested items to your listings - Check it out on 3Dsellers.com
· All Rights Reserved to My Store ·
listing template by 3Dsellers.com - Try for Free!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.