Spark Plug Cleaner Pneumatic Sand Blaster w/ AbrasiveNew in Box
Made by PMD Products
Blaster removes carbon build up on plugs, or will thoroughly dry a flooded plug (blow-off mode)
- 2 Position cleaning, position 1 for rigorous abrasive cleaning and position 2 for air blow-off
- Mounting flange to attach to workbench, All Metal Construction
- Include Abrasive Media and Manual (Abrasive media is in a bag inside the tool upon opening the tool)
- 1/4\" NPT inlet, recommended 90 PSI, Air consumption 7.7 CFM
- se to remove performance hindering carbon build up from spark plugs, Works with all spark plug types and sizes
- NOTE- when unpacking the tool, the abrasive is inside of the dust bag
INCLUDES ABRASIVE MATERIAL
Use Instructions:
Connect tool to your air source through air adapter (included), insert spark plug in end, push blaster button for a few seconds, switch lever to blow off mode, push blaster button again to apply air for another few seconds to clean the media from around the porcelaine of the plug and remove cleaned spark plug
Details:
Cleaner tool has 2 positions, position 1 for rigorous abrasive cleaning and position 2 for air blow-offMounting flange to attach to workbenchBrass air adapter includedAir consumption 7.7 CFM3/8\" hose recommended use1/4\" NPT inlet, recommended 90 PSIWorks with all spark plug types and sizes Overall dimensions: 8-1/16\" L x 2-9/16\" W x 3/4\" diameter
See our other listing for the spare or extra spark plug blaster mediaBuyer to pay shipping determined on shipping tab above. will combine orders, will ship international
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.