Description
This Semi-Automatic Glue Dispenser is a precision fluid dispensing system designed for accurate, repeatable application of solder paste, liquid adhesives, and other fluids in electronics repair, manufacturing, and assembly applications. Featuring digital time control with multiple timing ranges (0.01s to 30s), precise air pressure regulation, and outstanding repeat accuracy of ±0.5%, this dispenser delivers consistent dot sizes as small as 0.01ml at speeds exceeding 300 dots per minute. Whether you are performing iPhone motherboard repairs, PCB assembly, or precision soldering work, this reliable dispenser ensures precise, consistent fluid application – reducing waste, improving quality, and increasing productivity.
✅ Precision Digital Timing Control – Multiple timing ranges: 0.01-1s, 0.1-10s, 0.2-20s, 0.3-30s for versatile dispensing applications.
✅ High Repeat Accuracy – ±0.5% ensures consistent dot-to-dot precision.
✅ Minimum Dispensing Volume – 0.01ml – ideal for micro-dispensing applications.
✅ High-Speed Operation – Over 300 dispensing cycles per minute for efficient production.
✅ Adjustable Input Pressure – 2.5-7 MPa for flexible air supply integration.
✅ Precise Output Pressure – 0.1-5.5 MPa for fine-tuned dispensing control.
✅ Digital Display – Clear readout for accurate parameter setting.
✅ 220V ±10% 50Hz Power – Standard voltage for most workshop environments.
✅ Semi-Automatic Operation – Easy to use – minimal training required.
✅ Versatile Fluid Compatibility – Works with solder paste, flux, adhesive, silicone, and more.
✅ Compact Design – Small footprint – fits any workspace.
✅ Reliable Performance – Built for consistent, long-term use.
Parameter Specification Product Type Semi-Automatic Glue Dispenser Timing Range 1 0.01 – 1 s Timing Range 2 0.1 – 10 s Timing Range 3 0.2 – 20 s Timing Range 4 0.3 – 30 s Input Pressure 2.5 – 7 MPa Output Pressure 0.1 – 5.5 MPa Repeat Accuracy ± 0.5% Minimum Dispense Volume 0.01 ml Working Speed > 300 cycles / minute Input Voltage 220V ± 10% / 50 Hz Control Type Digital Time Control Display Digital Indicator
Fluid Type Application Solder Paste PCB soldering, iPhone repair, micro-soldering. Flux Pre-soldering surface preparation. Adhesive Glue Component bonding, general assembly. Silicone Sealing, potting, gasket formation. Epoxy Structural bonding, encapsulation. UV Curable Adhesives Display and lens bonding. Conductive Adhesive EMI shielding, grounding connections. Underfill Chip encapsulation and protection.
Industry Application Phone Repair iPhone logic board repair, component replacement, solder paste application. PCB Assembly Solder paste deposition for SMT and hand assembly. Electronics Manufacturing Precision adhesive and sealant application. LED Assembly Dispensing thermal paste and adhesive for LED modules. Medical Devices Precision adhesive application for medical electronics. Automotive Electronics Sensor and module potting. Watch & Jewelry Repair Precision adhesive and flux dispensing. Laboratory Fluid dispensing for research and development. General Assembly Bonding, sealing, and potting applications.
Advantage Benefit 0.01ml Precision Micro-dispensing for fine electronics and smartphone repair. ±0.5% Repeat Accuracy Consistent results – every dot identical. >300 dots/minute High-speed dispensing – improves productivity. 4 Timing Ranges One machine handles short and long dispense cycles. 0.1-5.5 MPa Output Adjustable pressure for different fluid viscosities. Digital Time Control Precise, easy-to-set dispensing parameters. Semi-Automatic Design User-friendly – simple operation. 220V Standard Power No special voltage requirements. Compact Design Saves valuable bench space. Versatile Fluids Works with solder paste, adhesives, flux, and more. Reliable Build Built for daily workshop use. Cost-Effective Professional performance at an affordable price.
Range Setting Best For 0.01 – 1 s Micro-dispensing, solder paste, flux, precise small dots. 0.1 – 10 s General adhesive, silicone, medium-volume dispensing. 0.2 – 20 s Larger dots, thicker fluids, potting compounds. 0.3 – 30 s Extended dispensing, high-volume applications, UV adhesives.
No. Important Tip 1 Pressure Setting – Adjust output pressure (0.1-5.5 MPa) based on fluid viscosity. Thicker fluids require higher pressure; thinner fluids require lower pressure. 2 Timing Selection – Select the appropriate timing range for your application. Test on a sample piece before production. 3 Air Supply – Ensure clean, dry air supply within the 2.5-7 MPa input pressure range. Install a filter/regulator if needed. 4 Needle Selection – Use the appropriate needle gauge for your fluid. Larger needles for thick fluids, smaller needles for fine work. 5 Fluid Viscosity – Different fluids have different flow characteristics. Adjust pressure and time to achieve consistent dot size. 6 Maintenance – Clean the dispenser head and needles after each use to prevent clogging. Flush with appropriate solvent. 7 Power Supply – Use a stable 220V ±10% 50Hz power source. Avoid using extension cords or power strips that may cause voltage drop. 8 Practice – Before starting production, practice with your specific fluid and settings to dial in the optimal parameters.
1 × Semi-Automatic Glue Dispenser Machine
-
1 × Power Cable (220V)
-
1 × Air Hose & Fittings
-
1 × Dispensing Needle Set
-
1 × Syringe/Barrel Holder (if applicable)
-
1 × User Manual (English)
⭐⭐⭐⭐⭐ Your satisfaction is our priority! If you are happy with your purchase, please leave us a positive response and 5-star rating.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.