Sega Dreamcast Clock Battery & Fuse Replacement Service
$32.99

I will then install a battery holder, bat85 diode, resistor, CR2032 battery, and self resetting fuse in your Dreamcast controller board. This listing is for a service requiring you to ship your part out.
The diode disables recharging from the controller board allowing a CR2032 battery to be used. CR2032 are readily available at most stores. Replacing the CR2032 can easily be done when needed with the removal of the 4 screws on the bottom of the case. Also included is a reflow of the fan connector connection, which is common to come loose when plugging/unplugging the fan.
If an original ML2032 battery is preferred, I stock those as well, include a note with your board as to which battery type is preferred.
I also can change the power led. I have red, green, blue, and white leds available.
The factory controller board has a fuse that if blown the controller ports will not function. The self resetting fuse will repair itself if blown by unplugging the system from the wall.
You can send in either the whole console or just the controller port. If sending only the port, it is recommended to place it in an anti static bag.
Return shipping is included.
If you have a controller board with a failed attempt, feel free to message me with pictures. I may be able to repair your board.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.