Scallop Template Quilt Ruler by Krista Moser for Creative Grids (CGRSCALLOP)Add a scalloped edge to a quilt with borders from 2 to 12 inches wide. One template carries three scallop sizes and a rounded corner unit. You cut paper copies of the shapes, fit them along the border, mark the edge before quilting, and trim with the template after. Krista Moser designed the tool and the paper method that fits the scallops to a border of any length. What\'s Included The Scallop Template and a two-page illustrated instructions sheet. This listing does not include fabric, paper, rotary cutter, and cutting mat. How to Use It Choose the scallop for your border: Small for borders 2 to 5 inches wide, Medium for 4 to 8 inches, and Large for borders up to 12 inches. Lay four pieces of paper, 4 1/2 x 6 inches, under the rounded corner and cut along the edge to make four corner units. Fold each in half. Cut the edge units the same way along the scallop you chose, starting at the valley and cutting up and off the end of the hill. A large quilt can take dozens. Turn half the stack over for the mirror image. Press a crease at 45 degrees from the inside corner to the outside corner of each border corner. Pin a paper corner unit on each crease with its fold on the crease. Set an edge unit against each corner unit, hill side into the curve, then fill in along the border. Overlap the units or spread them apart until they fit, from 1/8 inch to 1 inch, and make the same adjustment on the hill side and the valley side. Pin the paper, trace the scallop edge with a fabric marking pen, and remove the edge units. Repeat on all four sides. Quilt the quilt, then use the template to cut the edge with a rotary cutter. Cut the rounded corners, turn the template to cut down the hill, and turn it over at the valley to cut out and up the next hill. Bind with bias binding. A QR code on the instructions sheet links to the demonstration video. Perfect For Scalloped borders on quilts of any length Narrow borders from 2 inches wide with the Small scallop Borders up to 12 inches wide with the Large scallop A scalloped edge that you mark before quilting and cut after Fit and Limits The three scallops are 1 1/2, 2, and 2 1/2 inches deep, and each scallop edge of the template is 6 inches long. You fit the scallops to the border with paper units, so the method needs paper, pins, and a fabric marking pen. The template has no QR code: the code is on the instructions sheet. The instructions do not cover binding steps. For rounded corners on a straight border, use the Curved Corner Cutter for a 1 1/2, 2, or 3 inch radius or the Round Up Tool for a 4 or 5 inch radius. Product Details Brand: Creative Grids Item #: CGRSCALLOP Designer: Krista Moser Category: Quilting Rulers Type: Template Scallop Sizes: Small, Medium, and Large, plus a corner unit Scallop Depth: 1 1/2, 2, and 2 1/2 inches Border Widths: 2 to 12 inches Total Size: 10 x 10 3/4 inches Material: Acrylic with embedded non-slip grip Markings: Black and white; 6 inch square grid with 1 inch lines and 1/2 inch dashed lines; numbers 1 to 6 on three sides; Small, Medium, and Large labels with depth arrows; two Corner Guide lines Includes: Template and illustrated instructions Made in the USA Need a Different Circle or Curve Tool? For cutting bias binding strips, see the Bias Binding Simplified ruler (CGRABB1). Browse the Creative Grids Circles & Curves Tools collection for every circle, oval, and curve tool. Scallop Template Quilt Ruler by Krista Moser for Creative Grids (CGRSCALLOP)
Add a scalloped edge to a quilt with borders from 2 to 12 inches wide. One template carries three scallop sizes and a rounded corner unit. You cut paper copies of the shapes, fit them along the border, mark the edge before quilting, and trim with the template after. Krista Moser designed the tool and the paper method that fits the scallops to a border of any length.
What\'s Included
The Scallop Template and a two-page illustrated instructions sheet. This listing does not include fabric, paper, rotary cutter, and cutting mat.
How to Use It
Choose the scallop for your border: Small for borders 2 to 5 inches wide, Medium for 4 to 8 inches, and Large for borders up to 12 inches. Lay four pieces of paper, 4 1/2 x 6 inches, under the rounded corner and cut along the edge to make four corner units. Fold each in half. Cut the edge units the same way along the scallop you chose, starting at the valley and cutting up and off the end of the hill. A large quilt can take dozens. Turn half the stack over for the mirror image.
Press a crease at 45 degrees from the inside corner to the outside corner of each border corner. Pin a paper corner unit on each crease with its fold on the crease. Set an edge unit against each corner unit, hill side into the curve, then fill in along the border. Overlap the units or spread them apart until they fit, from 1/8 inch to 1 inch, and make the same adjustment on the hill side and the valley side. Pin the paper, trace the scallop edge with a fabric marking pen, and remove the edge units. Repeat on all four sides.
Quilt the quilt, then use the template to cut the edge with a rotary cutter. Cut the rounded corners, turn the template to cut down the hill, and turn it over at the valley to cut out and up the next hill. Bind with bias binding. A QR code on the instructions sheet links to the demonstration video.
Perfect For
- Scalloped borders on quilts of any length
- Narrow borders from 2 inches wide with the Small scallop
- Borders up to 12 inches wide with the Large scallop
- A scalloped edge that you mark before quilting and cut after
Fit and Limits
The three scallops are 1 1/2, 2, and 2 1/2 inches deep, and each scallop edge of the template is 6 inches long. You fit the scallops to the border with paper units, so the method needs paper, pins, and a fabric marking pen. The template has no QR code: the code is on the instructions sheet. The instructions do not cover binding steps. For rounded corners on a straight border, use the Curved Corner Cutter for a 1 1/2, 2, or 3 inch radius or the Round Up Tool for a 4 or 5 inch radius.
Product Details
- Brand: Creative Grids
- Item #: CGRSCALLOP
- Designer: Krista Moser
- Category: Quilting Rulers
- Type: Template
- Scallop Sizes: Small, Medium, and Large, plus a corner unit
- Scallop Depth: 1 1/2, 2, and 2 1/2 inches
- Border Widths: 2 to 12 inches
- Total Size: 10 x 10 3/4 inches
- Material: Acrylic with embedded non-slip grip
- Markings: Black and white; 6 inch square grid with 1 inch lines and 1/2 inch dashed lines; numbers 1 to 6 on three sides; Small, Medium, and Large labels with depth arrows; two Corner Guide lines
- Includes: Template and illustrated instructions
- Made in the USA
Need a Different Circle or Curve Tool?
For cutting bias binding strips, see the Bias Binding Simplified ruler (CGRABB1). Browse the Creative Grids Circles & Curves Tools collection for every circle, oval, and curve tool.
× × ×
Buy now and save! Shipping info
Click the Shipping & Payments tab above the listing description for more info
Click the Shipping & Payments tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYMENT
Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination\'s state and local sales tax laws.
Thank you for shopping with us on !
Additional Information
No additional information at this time
Ask seller a question
You might also like Ann Fahl Teaches You Coloring With Thread Video on DVD for C&T Publishing Finesse Your Knitting 2 Video on DVD with Lucy Neatby of Tradewind Knitwear Desi Knitting Gems 1 Video on DVD with Lucy Neatby of Tradewind Knitwear Designs AlphaClips Mega Marking Clips from Sewing by Sarah Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Smartisans
Shipping & Payments
Click the Shipping & Payments tab above the listing description for more info
Payment
Accepted Payment Methods
Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination\'s state and local sales tax laws.
Thank you for shopping with us on !
Returns
Returns are accepted
Items must be returned within 30 days of the sale ending
Buyer will pay for return shipping.
integration by
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.