|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
SYSTEM SENSOR RA100Z
$25.00

The System Sensor RA100Z is a polarized, compact remote LED annunciator designed to provide visible alarm indications for fire safety systems. It is primarily paired with HVAC duct smoke detectors (like the System Sensor D2 or D4120) to offer diagnostic visibility when the primary detector is installed in hidden or hard-to-reach locations.Core Specifications - Voltage Range (Conventional): 3.1 to 32 VDC
- Voltage Range (Intelligent): 18 to 32 VDC
- Maximum Current Draw: 10 mA maximum via an active current regulator
- Operating Temperature: 14°F to 140°F (-10°C to 60°C)
- Mounting: Standard single-gang electrical box
- Wire Gauge Compatibility: 12 to 18 AWG
Key Installation Requirements - Polarity Sensitive: Wiring must strictly observe positive and negative connections at the \"+\" and \"–\" terminals.
- Jumper Configuration: You must install the provided physical jumper over both pins if you are connecting it to a conventional system. Do not install this jumper for intelligent system applications.
- Predecessor Replacement: The RA100Z is the direct functional replacement for the older RA400Z model.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|