Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

RetroScaler 2x Retro Game Consoles To HDMI Adapter HDMI-Support Converter New

RetroScaler 2x Retro Game Consoles To HDMI Adapter HDMI-Support Converter New
$67.99

Buy Now

RetroScaler2x Supported Console (but not limited to):

Connecting your RetroScaler2x:usage video:https://youtu.be/C4ecNqamDa8

Buttons, connectors and external controls:Component video input--Connect component video (YPBPR) sources to this input. As a note, the chip used in this devicedoes not support RGB, so an RGB SCART input will never be an option.

S-video input--Connect an S-video (4 pins connector) source to this input, other sources are not support.


AV input--Standardcomposite (RCA) connector. Youcan connect sources such as the Nintendo Super Famicom, Nintendo GameCube, N64 etc.


HDMI video out--All the received video and audio signals will be output on the modern LCD monitor/TVs with HDMI interface.

Power input--Any decent quality Micro USB charger can be used to power the RetroScaler2x, as it’s a very efficient device. Yourare even able to power mine via the USB ports of your TV!

Power Switch--Toggles power off and on.Input Select (INPUT SELECT)--The input button selects between the composite, S-Video and Component Video inputs, or combination.Output Select (SMOOTHING)-- The smoothing mode button allows you to chose which video mode it’s in

FIL (blue led lights on):This mode addsa filtering option to to minimize image aliasingfor the 480p/576p output.



2x Mode (orange led light on ):This is the standard “LINEDOUBLE”mode that outputs 480p/576p. This is the mode that’s the system defaults to when powered on.

Pass-through (both orange and blue LEDs light off):This mode simply output whatever the input signal is, without changing the resolution.


RetroScaler2x Features:


Signals / Resolutions:

The RetroScaler2x can accept240p/480i/288p/576iNTSC/PAL sources to converter to 480p/576p HDMI output (480p for NTSC, 576p for PAL). For example 240p signalsaresupported properly, allowing for a completely progressive linedouble to 480p.480i signals are deinterlaced and doubled also to 480p.Keep in mind that the output resolution of this device only up to480p/576p.


Zero Lag:

The RetroScaler2x is azerolag device, proven using multiple measurements and different devices.


Region Compatibility:

Both NTSC and PAL signals are supported, butthey are not convertedto each other. That means you can plug in whatever signal yourtargetdevice is compatible with, but NTSC might not work on PAL HDMI devices and vice versa.


Filter Modes:

The “FIL” mode is completely preference-based, but the average retro-gamer prefers the FIL mode off for 2D games (SNES, Genesis, etc) and on for 3D games (N64, Saturn, etc). Also, the FIL mode might help reduce flicker with some 480i-only games.


Compatibility:

Another great feature of the RetroScaler2x is that it outputs a true 480p60 signal, making it compatible with every device I tested it with! Compatibility is a big issue for retro-gamers, as modern displays aren’t used to the resolution or refresh rate of these older consoles. This device is an excellent help for streamers who want the highest chance of compatibility.


Performance – Audio:

Audio performance on the RetroScaler2X isgood although we would have to stop short of saying it was perfect. In general uses there are no issues with the audio digitization but on brassieresounds like explosions the output may sound a little rougher than it did through the OSSC. This isn’t something you’re likely to even notice on a TVs speakers, though you might if you have an external amp or home theatre system. In that case of course, it’s usually perfectly easy to route audio around the RetroScaler2X anyway.


The Pass-through:

By putting the RetroScaler2X into pass-throughmode, incoming composite, s-video or component signals are simply transparentand digitized into HDMI. Support for 240p is rare in the world of HDMI, but by adding a simple HDMI to VGA converter, you can convert the signal back to the analogue domain again. This makes the unit a perfect transcoder to go with 15 kHz displays like PVMs, or of course, the OSSC.


FAQ:

1. Why is there a sound delay?

This is related to the compatibility of the TV. Please try using another TV.


2. Why is there no screen display?

Please try setting the Retroscaler to 2X mode. And please also check whether the TV you are using can support the resolution output by RetroScaler2x.



Important safety information:

Please observe the following safety precautions when using your Retro Scaler2x.


Use the correct power supply--the Retroscaler2x is powered by a regular 5 volt Micro USB port that can be powered by a normal power supply or powered by a device that has a USB port. Please make sure that the power supply you are using meets any of the above requirements. Never use a power supply that is not regulated to prevent damage to the equipment.


Turn off the power before connecting/disconnecting the device--to prevent damage to the device ICs, always turn off the power before connecting the monitor or device.


Do not expose to moisture Droplets of moisture--may contact the PCB and cause a short circuit. Never submerge the unit in water.


Keep away from fire or high heat sources–RetroScaler2X is not flammable but high temperatures, such as those from a fire or electric heater may melt the plastic casing.


Please supervise children--Retro is not a toy and is not designed for use by children. Please supervise children if they use the Retro.



RetroTINK2Xand OSSC

You can simply use the two devices in tandem, supportboth composite video and s-video and advanced features of ossc. Piggybacking the RetroScaler2x to the OSSC is very easy .All you need is a simple HDMI to VGA adapter. We will be carrying a tried and tested model in our store that fully supports 240p output and does not appear to crush blacks or over-saturate whites.


With a suitable adapter in hand, set the RetroScaler2X to transcode mode, connect the HDMI to VGA adapter to your RetroScaler2X, then connect the output of the adapter into your OSSC via the VGA port. Finally, switch the VGA port on the OSSC to 480p mode (Sampling opt->480p in sampler->DTV 480p).you have access to the OSSCs famous scanline engine and line multiplication modes with all your composite video and S-Video sources.


You can also access things like the advanced timing tweaker, allowing you to center the image using the backporch controls or apply a little faux zoom using the V.Active controls.


The following figure is the AV signal input connection diagram:


1.You need to prepare 3.5 stereo male head to lotus female head to connect AV Audio and Ossc Audio.The yellow lotus head is connected to the RCA of the Retroscaler2x.


2.The HDMI to VGA adapter is used to connect the HDMI interface of Retroscaler2x and the VGA interface of OSSC.

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design