|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
RP2350A USB Mini Development Board with 2.0 Type-A Connector
$17.86

RP2350A USB Mini Development Board with 2.0 Type-A Connector Product Details - Publisher: SMKTelec
- Publication date: 0
- RP2350-USB-A mini development board based on RP2350A microcontroller chip, onboard 1x USB Type A expansion port via PIO, compatible with USB 2.0/1.1 transmission, onboard USB Type-C connector for programming, USB 1.1 with device and host support
- Adopts dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz. 520KB of Static RAM, and 2MB of onboard Flash memory
- Adapting 15 × multi-function GPIO pins. 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 14 × controllable PWM channels. 12 × Programmable I/O (PIO) state machines for custom peripheral support. Castellated module allows soldering directly to carrier boards
- Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip
- Supports C/C++, Arduino IDE
IntroductionRP2350A USB mini development board, based on RasPi 2350A dual-core & dual-architecture microcontroller, up to 150MHz operating frequency, onboard 1x USB Type A expansion port via PIO, compatible with USB 2.0/1.1 transmission, castellated module, suitable for SMD applicationsFeaturesAdopts RP2350A microcontroller chip, dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz520KB of Static RAM, and 2MB of onboard Flash memoryType-C connector, keeps it up to date, easier to useCastellated module allows soldering directly to carrier boardsUSB 1.1 with device and host supportOnboard 1x USB Type A expansion port via PIO, compatible with USB 2.0/1.1 transmissionLow-power sleep and dormant modesDrag-and-drop programming using mass storage over USBAdapting 15 × multi-function GPIO pins2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 14 × controllable PWM channelsAccurate clock and timer on-chipTemperature sensorAccelerated floating-point libraries on-chip12 × Programmable I/O (PIO) state machines for custom peripheral supportSupports C/C++, Arduino IDE, with online development resources, comprehensive SDK, tutorials to help you easily get startedPackage ContentRP2350-USB-A x1Note:Online Dev Resources and Tutorials to help you easily get started. Please feel free to contact us with any questions

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|