Python Keyless Remote Car Key Fob EZSDEI474P car starter 1200HP 1400XP 1600XP OE

Chip in case - see PHOTO #2

See pictures for anexample of what you will receive.

One (1)

Aftermarket Security InstalledSystemremote

keyless entry fob alarm beeper keyfab

Transmitter control clickerkeyfob controller replacement

Directed Electronics Inc. (DEI)

Viper / Valet/ Hornet / Python

Chip in case - see PHOTO #2

FCC ID #: FCC ID: EZSDEI474P

( Alternate Spelling: EZSDE1474P )

Interchangeable FCC IDs:

EZSDEI474

EZSDEI474P

Part #: 474P

Interchangeable Part #s:

470

474

475

476

485

820041

7143

26131

SAA474U

LED Light Color: Green

Buttons: 4; Lock, Panic Alarm, Unlock, Aux

Frequency: 433 - 434 MHz (433.92)

Battery: 1; CR2025

See Item Specifications for more details

Please note:

A Valet / Programming switch is required to program this remote.

Programming can be difficult if you are not familiar with it. Please read the programming instructions (below) before purchasing. Assistance from an auto specialty shop or locksmith may be needed.

Compatible with the following Aftermarket installed security systems:

Compatible w/ the following systems:

Automate

6

7

10

25

35

410

425

435

52

53

552

553

Avital

2100

2200

2300

3100

3200

3300

4000

4100

4200

4300

4400

Maxx2

Maxx3

Hornet

533 T

554 T

740 T

742 T

851 T

Python

400 HP

440 HP

450 ESP

460 HP

500 HP

625 HF

650 ESP

660 XP

700

900

1000 HF

PC 1000 HF

1200 XP

1400 XP

1500 HF

1600 XP

2000 HF

3000 HF

3000 ESP

Sidewinder

3000 HF

3000 ESP

3200 HS

3300 HS

3500 ESP

4500 HF

5000 HF

5000 ESP

5500 XS

6000 HF

6000 ESP

6500 HF

6500 ESP

7000 HF

7000 ESP

PC 7000 SHF

Rattler

100

110 D

200

210 D

250

259 R

300

310 D

359 R

369 D

Valet

450 R

519 H

551 R

552 T

562 T

561 R

712 T

716 T

Merlin

2000

Ungo

K10

K20

RK1

RS10

S100

S400

S660

S670

SR1000

SR5000

SR6000

Viper

100 HF (ESP)

130 HV

150 ESP

160 XV

210 HV

211 HV

300 HF

PC 300 HF (ESP)

300+ HF

330 V

350 HV

500 HF

PC 500 HF (ESP)

550 HF

550 HF (ESP)

560 XV

571 XV

600 HF

PC 600 HF (ESP)

650 XV

671 XV

700 ESP

771 XV

PC 800 SHF

800 SHF ESP

850 XV

1000

1002

3000

3002

5000

5002

7900

Programming Instructions:

Programming Instructions:

The vehicle’s system can store up to 4 transmitters (remotes) into memory. Use the following programming routine to add transmitters to the vehicle’s security system or to change button assignments if desired.

In order to enter Learn Routine, the Valet/Program push button must be plugged into the main brain\'s Blue 2 Pin Port (Look for a small black push button located under the drivers dash or drivers kick panel somewhere).

The Valet/Program switch, plugged into the blue port, is used for programming. There is a basic sequence of steps to remember whenever programming this unit.

1) Open a door and make sure the dome light is on.

2) Turn the ignition on to the RUN position or you may also start car.

3) Within 10 seconds, press and release the Valet/Program switch the number of times that corresponds to the desired channel (listed below). Once you have selected the channel, press the switch once more and HOLD it. The LED will flash and then the horn will chirp (if connected) to confirm the selected channel. Do not release the Valet/Program switch.

CHANNEL #

FUNCTION

1

Arm / Disarm / Panic

2

Silent Mode / Remote Valet / Trunk Release

3

Remote Start or other accessories

4

Arm only (4 button remote)

5

Disarm only (4 button remote)

6

Panic only (4 button remote)

7

Auto Program single Arm – Disarm – Panic button configuration (4 button remote)

8

Auto Program this remote

9

Delete all transmitters

CHANNEL 9:

If any transmitter button from a known transmitter is programmed to channel 9, all transmitters will be erased from memory. This is useful in cases when one of the customer’s transmitters is lost or stolen. This will erase any lost or stolen transmitters from your system’s memory. It can also be used to start from scratch if the transmitter buttons were programmed incorrectly.

4) You can advance from programming one channel to another by releasing the Valet/Programming switch and tapping it to advance channels and then HOLDING it. For instance; you have programmed Channel 1 and you want to program Channel 2. Release the Valet/Program switch. Press it one time and release it to advance from Channel 1 to Channel 2. Now, press and HOLD the Valet/Program switch. The LED will flash 2 times and the horn will chirp twice (if connected). As before, do not release.

If you want to program Channel 3 after programming Channel 1, release the Valet/Program switch, press it twice and release it to advance to Channel 3. Then press it once more and HOLD it. The horn will chirp 3 times (if connected) and the LED will flash 3 times to confirm it is ready to receive the code from the transmitter.

5) Once the code(s) are learned, the Valet/Program push button can be released.

6) Programming mode will be exited if one of the following actions occurs:

a. Ignition key is turned to the OFF position

b. Valet/Program switch is pressed too many times.

c. More than 15 seconds elapses between programming steps.

The horn will emit one long chirp when programming mode has been exited.

How to find out ifthis remote is compatible with your Vehicles’ installed RKE System

If you\'re notsure yourvehicle can use this remote, please ask questions or contact your local dealerfirst.

1. Check the back ofyour current or old keyless remote to match FCC ID /Part #’s.

2. Contact your localdealer and tell them your VIN# and ask what part # / FCC ID you need.

Yourvehicle will be installed with one of the following keyless entry systems:

a. Standard Keyless Remote Packages: Installed at time ofmanufacture.

b. Optional Keyless RemotePackages: Installed by a dealer.

c. Aftermarket Keyless Remote Packages: Installed by previous owner or acar/audio shop.

d. No remote keyless entrysystem at all.

Theabove information can change which remote you need
for your installed remote keyless system.

Please Note: Each remote andcircuit board is UV id’d prior to shipment – All returns receive a UV IDinspection to verify originality of remote sent prior to refund or replacement.

Does this keyless remote entry come with abattery?

Yes. It will have a working batteryinstalled.

Battery Condition:

A. All remotes sold on Keyless4u include working batteries.

B. Installed batteries are not tested for battery life- they are simplyworking.

Some are new and some are used.