Automatic Inline Checkweigher · 3‑Section AC110V Automatic Inline Checkweigher · 3‑Section Product Overview
High‑precision 3‑section dynamic weighing system for real‑time weight verification of packaged products. Three integrated sections: powered weighing conveyor with precision load cell, motorised roller rejection with stainless steel pusher, and non‑powered gravity roller collection. Fully automated accept/reject sorting up to 50 kg capacity, accuracy ±0.3–1 g. Conveyor speed 20–50 m/min, throughput 20–80 pcs/min. Digital controller with photoelectric sensors, colour touch screen, food‑grade stainless steel frame and green PVC belt. 110V AC operation with included transformer.
Product Parameters Weighing RangeUp to 50 kg (110 lbs) Detection Accuracy±0.3 – 1 g Conveyor Belt Speed20 – 50 m/min (adjustable) Detection Speed20 – 80 pcs/min Power SupplyAC 110V, 50/60Hz (with transformer) Total Power1000 W Motor Power370 W × 2 Conveyor Belt MaterialGreen PVC (food‑grade) Belt Working Height700 mm + 150 mm (adjustable) Weighing Section Dimensions1000 × 600 mm (39.4″ × 23.6″) Rejection Section Dimensions1000 × 600 mm (39.4″ × 23.6″) Collection Section Dimensions700 × 700 mm (27.6″ × 27.6″) Overall Dimensions (L×W×H)2000 × 1707 × 1235 mm (78.7″ × 67.2″ × 48.6″) Net / Gross Weight (PART 1)109 kg / 174 kg (240 / 384 lbs) Package Dimensions (PART 1)160 × 116 × 104 cm (63.0″ × 45.7″ × 40.9″) Net / Gross Weight (PART 2)115 kg / 173 kg (254 / 381 lbs) Package Dimensions (PART 2)117 × 106 × 140 cm (46.1″ × 41.7″ × 55.1″) Product Features & Advantages Pneumatic Pusher Rejection
Stainless steel pusher plate, pneumatic cylinder activation. Diverts non‑conforming products in < 0.3 s at up to 80 pcs/min. Corrosion‑resistant, reliable.
Motorized Stainless Roller Section
Polished rollers, independent 370 W motor, sealed bearings. Smooth transport, debris shedding, maintenance‑free in dusty/humid environments.
Gravity Roller Collection
Non‑powered rollers, slight downward incline. Gentle product handling, 700×700 mm collection area, minimal power consumption.
Leveling Feet + Swivel Casters
Heavy‑duty casters for mobility, stainless steel leveling feet with non‑slip pads for stable anchoring and precise floor compensation.
Food‑Grade Green PVC Belt
Reinforced fabric core, 600 mm width, excellent grip. Easy to clean, meets food‑hygiene standards, stable under continuous load.
Precision Photoelectric Detection
Through‑beam sensors, shielded cables, immune to interference. Reliable product detection and trigger timing for ±0.3‑1 g accuracy.
- Pneumatic Pusher – stainless steel plate, < 0.3 s actuation.
- Motorised Roller Section – sealed bearings, 370 W independent drive.
- Gravity Collection – 700×700 mm, gentle product handling.
- Touch Screen – intuitive recipe storage, statistics, diagnostics.
- Green PVC Belt – food‑grade, fabric‑reinforced, 600 mm width.
- Photoelectric Sensors – high‑precision through‑beam, shielded.
Operation Method
- 1. Assembly & Placement: Assemble three sections on level floor. Connect joining hardware, level support feet. Connect transformer and air supply (0.4–0.6 MPa).
- 2. Power On & Calibration: Turn on main switch, allow 10 min warm‑up. Place certified test weight and follow on‑screen calibration.
- 3. Program Weight Limits: Enter target weight, upper/lower tolerances via touch screen. Save as named recipe for quick changeover.
- 4. Set Conveyor Speed: Adjust speed 20–50 m/min via screen. Lower speed for higher accuracy, higher for throughput.
- 5. Start Production: Press start button. Products are weighed, compared, accepted or rejected automatically. Monitor pass/reject counts.
- 6. Data Review & Export: View statistics (total, pass, reject, average, σ) and export via USB port. Clean belt/rollers after each shift.
Safety Precautions
⚠ WARNING: Moving belts, rollers, and pneumatic pusher. Read all instructions before use.
- Moving Parts Hazard: Keep hands/body away from belts, rollers, pusher. Emergency stop must be accessible.
- Pneumatic Safety: Air pressure ≤ 0.6 MPa. Disconnect air before maintenance.
- Electrical Safety: Grounded AC 110V only. Do not operate with wet hands. Disconnect before cleaning.
- Conveyor Entanglement: Secure loose clothing, jewellery, hair. Roll up sleeves.
- Stability: Install on flat, level floor. Lock casters after positioning.
- Weight Limit: Do not exceed 50 kg. Avoid impact on load cell.
- Cleaning Safety: Lock out power. Use compatible cleaning agents. No high‑pressure water on electrical panels.
- Emergency Stop: Press red button immediately in danger. Rotate to reset.
- Qualified Operators: Trained adults only. Keep children and unauthorised persons away.
- Maintenance: Daily inspection of belt, rollers, pusher, sensors. Replace worn parts promptly.
Product Dimensions Item Included (057173) Weighing Conveyor ×1 · Roller Rejection (with Pusher) ×1 · Collection Section ×1 · Power Cord ×1 · User Manual ×1 ⦿ Order with confidence – 24h support ⦿ Handling: 1‑3 business days (Mon‑Fri) ⦿ Warranty: 6 months (consumables excluded) · post‑warranty service available Shipping & Handling
Default shipping – free standard shipping for Canada and lower 48 US states (Canada Post, USPS, UPS Ground). Other regions / expedited contact us.
Extra cost areas – Guam, PR, VI, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO – additional charges apply.
Address validity – buyer bears costs for incorrect/undeliverable addresses.
Sales tax / customs – buyer responsibility.
Damage in shipping – contact us immediately; we resolve promptly.
Return & Refund
▸ Returns within 14 days of delivery, unused with original packaging. Partial refund for opened/damaged items.
▸ Buyer’s remorse: return shipping + original shipping deducted; 15% restocking fee.
▸ Seller error: full refund including shipping.
▸ RA number required – contact us first.
▸ Defective/damaged: notify within 7 days; provide images/video. Replacement or refund.
Payment & Warranty
eCheck – clears in 5‑7 business days; shipment after clearing.
Warranty – 6 months for machine (consumables excluded). Warranty shipping to seller borne by buyer; return to buyer covered by seller.
response – we value your satisfaction. Contact us for any issues; positive response appreciated.
Technical specification subject to verification · v2.0
On Aug 17, 2026 at 01:40:30 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.