PWM DC Motor Speed Controller DC 2V 24V 60V 500W Electric Motor Speed Control...
$34.99

PWM DC Motor Speed Controller DC 2V 24V 60V 500W Electric Motor Speed Control Regulator Power Speed Controller with Signal Generator Driver Module
【High Grade Material】 This PWM Motor Speed Controller is made of quality circuit board material, which has a good durability and wear-resistance to ensure a long term service. 【Soft-s【Soft-start protection】 The motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the protection】 The motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the motor. 【Digital Encoder Button】 The digital encoder knob can adjust the motor speed, which is more accurate and consistent to control the engine speed than ordinary potentiometers. 【Features】 The duty cycle maximum and minimum limits can be set, as well as the output frequency. 【Wide Input Voltage Range】 This DC Motor Speed Controller supports a widely input voltage from DC 9V-60V, and it fits to 2V 24V 36V 48V power supply, at the same time the output current is 2A, power 500w, which ensures a widely application. You can use this Adjustable Motor Controller in different occasions upon different purposes.
Properties: . The knob can be pressed down to control the start and stop of the output. In addition, there is an external control switch at the back of the board (you need a quick reset button or key) to reserve the interface. (Note: The external switch should use the self-reset button or key, press to open and then press to close;it can\'t realize the function of opening output when it is closed all the time, and closing output when it is not closed.) 2. Motor soft start function. When starting the motor, the current increases slowly and there is no shock current, which can effectively protect the motor and prolong its service life. 3. The duty cycle maximum and minimum limits can be set, as well as the output frequency. 4. Digital encoder knob adjusts motor speed, which is more accurate and consistent than ordinary potentiometer. 5. With standard 535 instrument shell, convenient for customer installation. Application: Drive motor Brightness control Speed control Parameters: Working voltage: DC 9V-60V Rated current: 2A Peak current: 20A Power: 500W (max.) Working Frequency: KHz-99KHz Frequency Accuracy: % Frequency Resolution: KHz Working cycle: 0%-00% Working cycle resolution: % Working Temperature: -40~85°C Working humidity: 0%-95%RH Size: 79*43*26mm Operation of digital encoder knob: . In the default interface: (the duty cycle is displayed by default) Short press: switch motor start and stop Long press 0s: to enter the setting interface Counterclockwise rotation: the duty ratio decreases Clockwise rotation: increased duty cycle 2. Under the setting screen: Short press: select setting parameters and switch between ON-OFF, duty cycle lower limit, duty cycle upper limit and working frequency.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.