The Basic and Advanced Ladder Logic Development KIT
Software and Hardware
Software:
Software available online by the Producer
Electronic Manuals and Training Section
PLC Software run on Windows 10, or 11 32bit.
This is a training course inladder logic from basic functions to advanced applications as used in theindustry today.
The USB is loaded withexamples, Hardware and Software manuals
The programming softwaresupplied is the latest version not a demo, so you can used in the real world.
Hardware :
ONE PLC Professional Controller DIN Board 20 I/O
ONE USB - RS232 Interface Cable
ONE FREE DIN Switching Power Supply 24VDC
ONE DIN Rail
Software for Windows 10, 32bit.
Software is FREE, cost include, Procurement, development, examples and data compilation
1 PLC Ladder Logic
USB Flash Drives With Software and Electronic Manuals FX Programming SoftwareGX-DEV FX- 8.25 and GT-Works2 With Serial Key
Open Software includes Programming and Hardware ManualFeatures: GX-DEV 1000 steps supports all this FX processorsFX0/FX0S, FX0N, FX1S, FX1N, FX(FX2/FX2C) FX2N/FX2NC.
FX3u
FX MELSEC single user FX Win Version 8.25, 1000 step for FX PLCs controllers series.
This is the standard software easy to use and simple, intuitive interface and a short learning curve.
Full upload and download, monitor, test and program all the Mitsubishi FX-series PLC
package includes the software and manuals in electronic format for programming and hardware installation .
Learn theEasy to uselogicblock functions programming
Program PLCs in the comfort of your own time in your PC.
PLC Programming & Simulator Software comes with most of the features of the HI-end industrials PLC\'s instructions
such as in Allen-Bradley, Siemens, Mitsubishi, Electrodepot, Fanuc, Omron etc.
Ideal for engineers or students who are ready to prepare real projects and exercise any automation challenge
PLC with 12 Inputs and 8 Relay OutputsThis programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed.High quality chip, stable performance, on-line download, on-line monitoring, automatic save when power off.Program is written in ladder logic programming language, supports for GX-Developer, GX-work2.Programming port is the port for program upload, download, test and monitor.It is reusable, stable, easy to learn. The PLC transmission baud rate is 9600.Operating Voltage:DC24(V)
Wide Power SupplyVoltage: 10-28VDC
Baud Rate: 9600
Programming Software:for GX-Developer, for GX-work2.
Size: Approx. 86 x 73x 20mm / 3.4 x 2.9 x 0.7inch
Weight: 120GPackage Included:
1 x PLC Board
Module function:
This module isprogrammable control, can achieve thousands of functions, stable and reliableworking performance, built-in watchdog timer circuit, to ensure that the modulefor a long time to run!!!
Some of the commonfeatures are shown as follows:
- Turn on the power supply, the relay 1 is closed for N seconds and then disconnect the relay 2 for N seconds.
- When the power supply is turned on, the relay 1 is switched off after N seconds, and then the relay 2 is closed for N seconds and then is turned off.
- The power supply is switched on, the relay 1, 2 have no action, when a signal or trigger button, relay 1 closed off after N seconds; then relay 2 closed off after N seconds, until the next trigger, repeat the same action.
- Through the signal 1, 2 programming, the control can be achieved on the relay 1 and 2 arbitrarily.
- When the signal 1 has a signal, the relay 1 is closed, the relay 2 is disconnected; when the signal 2 has a signal, the relay 1 is turned off, and the relay 2 is closed.
- Can be connected to the NPN sensor signal, the sensor signal programming, to achieve arbitrary control of the relay.
- When the signal 1 is triggered, the relay 1 is controlled, and when the signal 2 is triggered, the relay 2 is controlled.
- Turn on the power supply, the control motor is turning N seconds, and then reverse N seconds, followed by the cycle.
- When the signal 1 has a signal, the motor is controlled to rotate; when the signal 2 has a signal, the motor is reversed.
- Input high speed pulse C235, C251 and FX1N compatible.
- Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc,.
- The PLC with two programming port. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. The TTL interface.
- Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030)
- Built-in Analog output DA, corresponding to internal data register D5101.
- When the PLC need to connect with the touch screen or text, can be used to connect 232 programming port.
Assistant Relay
Normal Use
M0 - M383
Hold After Power Off
M384-M1535
Special Use
M8000-M8255
State
Holding Use
S0-S999
Timer
100MS
T0-T199
10MS
T200-T245
1MS
T246-T249
100MS accumulation
T250-T255
Counter
16-bit
C0-C15(0-32767)
16-bit(Hold After Power Off)
C16-C199
High Speed(Hold After Power Off)
C200-C255
Data Register
16-bit
D0-D127
16-bit(Hold After Power Off)
D128-D5029
16-bit Special Use(AD)
D5030(Output Voltage: 0-10V)
16-bit Special Use(DA)
D5101(Output Voltage: 0-3.3V)
Please contact a Certified professional or a Mitsubishi PLC Specialist
Copyright2018
- IBM®PC or higher compatible computer
- Windows®operating system, Win 10
- Minimum of 128 megabyte of RAM memory.
- Minimum of 12 megabyte of available hard disk space.
- 800 x 600 or higher screen video capability.
- Optional Graphics-capable printer.
- USB drive.
Price include procurement, compilation of data production Software is FREE
NOTE International Shipping Via Global Shipping Program
-
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.