Feature Products
PID Digital Temperature Controller Universal Input Relay Output Vertical type
REX-C400Features
1. Dual set temperature and process temperature display
2. Universal input, supporting 10 different types of thermocouple and RTD inputs selected by the customer at the panel.
3. Four digit LED display up to \"9999\"
4. For use in ovens, applications, ovens, temperature controlled incubators
5. Used in various IT industries to control and monitor process temperaturesSpecification
Range inputs: K (0 to 1372°C), S (0 to 1769°C), R (0 to 1769°C), T (-200 to 400°C or -199.9 to 400°C), E (0 to 800°C) , J (0 to 1200°C), B (0 to 1820°C), N (0 to 1300°C), PT100 (-200 to 650.0°C) or (- 199.9~650℃), cu50(-50~150℃ or -50.0~150℃ )
Resolution: PT100 and CU50 can do 0.1, the others are 1
Output mode: relay contact output
Alarm: Default upper limit deviation alarm
Voltage: 100-240VAC /50~60HZCaution
Clean the instrument only when it is switched off.
Use a soft cloth or cotton paper to wipe stains from the screen.
Do not use hard objects to clean or touch the screen to avoid scratching.
Use sharp and hard objects. Do not touch the panel buttons with a large head screwdriver or ball screwdriver to prevent scratching or damage.Warm Tips
Relay output is available for direct heating tube, connected to 220V, heating tube power need to be used with AC contactor if large, small power can be used independently, solid state output is DC12V DC voltage output, must be connected to solid state relayList (two versions available, please note your choice)
1 x Temperature controller (thermocouple and sensor not included)
2 x Carabiner
1 x Instruction manualREX-C700
Features
1. 100% new and high quality
2. This series of products is based on the most advanced modern control theory, using microcomputer microcontroller control
3. Intelligent temperature control instrument with PID self-tuning (automatic optimisation) function
4. For use in ovens, applications, ovens, temperature controlled incubators
5. Used in various IT industries to control and monitor process temperaturesSpecification
Size: 11 x 7.2 x 7.2cm
1. Measurement error: 1% + 1 word, 0.5% ± 1 word, 0.2% ± 1 word in three steps.
Additional cold end compensation error:in the range of 0~50℃, ≤±2℃, temperature coefficient≤0.05%/℃
2、Measurement digital display range: a 1999 ~ 9999, -199 ~ 9999 two.
3、Alarm range: the full range of free setting.
4, relay output contact capacity: 3A/220V, resistive or specified.
5, SCR trigger signal:15/40 u S or rated 100mA, instantaneous IA (self-triggering). 6, Solid state relay output signal:15± 3V/3 0mA.
7、Working power:22oV ~ ± 10%50HZPower consumption:4W.
8、Working environment:0~50℃, relative humidity 35%~85%RH, non-corrosive and no strong electromagnetic field radiation occasions.Caution
1、Check whether the instrument index number specification and power supply voltage are the same as the ordered instrument.
2, according to the wiring diagram correct wiring.
3、For thermocouple input signal, please use the same material compensation wire as thermocouple wire.
4、For RTD input signal, please use the same specification of low resistance value wire, and try to have the same length of three wires.
5, pay special attention to the power input line and sensor signal input line can not be confused with the wrong connection, otherwise the whole instrument burned and scrapped, can not be repaired.
It cannot be repaired. The output terminal cannot be short-circuited by strong current.
6, instrument power and signal lines and high current output lines as far as possible to separate the surface line, in order to reduce the impact of electromagnetic radiation on the instrument.
If this is unavoidable, please use shielded wires as far as possible.Repair of common problems.
According to the instrument specifications connected to the corresponding power supply line, sensor line and output control line, after power on the instrument PV window that shows the measured value, SV window that shows the set value, while entering the automatic temperature control state.
1、If you think the meter is out of order, please check the sensor and wiring.
2, the instrument panel various functions display, output indication are normal, and the instrument out of control, please check whether the output control line connection is correct, whether the external load is short-circuit, break ﹑ wrong line, etc. resulting in damage to the internal components of the instrument, when necessary, you can stop the power to open the instrument to check, the output terminal copper foil, output protection resistor is burnt, etc.Package List: (available in two versions, please note your choice)
1 x temperature controller (thermocouple and sensor not included)
2 x carabiner
1 x Instruction manual
- Shipping Policy
- Item Location
- Payment Mathord
- Returns Policy
- About response
Shipping Policy1. We Ship to Worldwide
2. We ship your orders within 1-2 business days after the payment cleared.
3. Item shipped from China via china Post Airmail, reach most of the countries within 2 to 4 weeks.
4. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don\'t receive
the item after 30 days,please keep in touch with us, we\'ll investigate and solve the delivery problem.
5. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges
are the buyer\'s responsibility. Please check with your country\'s customs office to determine what these
additional costs will be prior to offerding or buying.Item LocationShenZhenPayment Mathord
1. We accept PAYPAL only.
2. Payment must be made within 7 days of sale closing (Unpaid dispute will automatically open when item
is not paid in 7 days).
3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
4. Please list your special requests (color, packages, value of declaration, etc.) in the NOTES SECTION
when you make payment
Returns Policy
1. Customer satisfaction is our top goal. All products are quality checked. They are new and in good
condition when shipped to our customers. If product is defective or damage upon arrival, or wrong
product shipped, please keep in touch with us immediately. Returns accepted within 14 days of delivery date
and item must be in original new condition, not worn or altered in any way with attached tags & wrap.
Otherwise deal is final. Return shipping must be paid by buyer.
2. Please keep in touch with us first if you have anyproblems/questions/concerns. We will be happy to resolve
any issues you may have in a cordial and friendly manner.
3. We appreciate your Positive response, and will do the same in return. PLEASE DO NOT leave
negative response without first communication with us. Please allow max 24 HOURS for us to respondAbout response
We maintain high standards of excellence and strive for 100% customer satisfaction! response is
very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or
negative response, so that we can satisfactorily address your concerns.It is impossible to address
issues if we do not know about them!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.