PATHWAY DMX REPEATER PRO 9116. NEW. PATHWAY CONNECTIVITY SOLUTION. NEW.
RDM/DMX Repeater Pro [9114, 9115, 9116, 9117, 9118]
An intelligent opto-splitter that brings Ethernet-type features to plain DMX networks.
An increasingly important part of DMX data distribution systems, the Repeater Pro\'s support for RDM (Remote Device Management) allows the Repeater Pro to act as an RDM Controller, or a offerirectional RDM splitter.
In venues where a console is moved frequently, Hub Mode allows the Repeater Pro to sense which port is receiving DMX, the automatically route the signal to the remaining ports—eliminating the need for patch bays.
The Repeater Pro also allows for easy prioritization between two consoles, or HTP-merge two sources with one source able to roam—ideal for incorporating remote focus units.
- Features
- Specifications
- Compliance
- Physical
- Tips & Tricks
- Silent operation
- 8 outputs
- E1.20 RDM and E1.11 DMX512A compliant
- Three modes: RDM, Merge, and Hub
- RDM discovery and end device management from the front panel
- RDM can be disabled on a port-by-port basis to accommodate older equipment
- Merge two controllers without any additional gear
- Automatically switch a console between locations by simply unplugging and replugging the console
- Units running in different modes can be chained together
- Fully configurable from the front display
- DMX output speed and signal loss behavior are user-selectable, including hold forever
- Monitor incoming DMX signal levels in real time
- DMX Console sends a channel level to all ports, for an independent DMX signal check on end devices
- Self-resetting over-voltage protection on all ports
- Ships with rack ears
Models
Description
9114
DMX Repeater Pro, 8-way, Rear XLR5, Fully Isolated
9115
DMX Repeater Pro, 8-way, Rear Terminal, Fully Isolated
9116
DMX Repeater Pro, 8-way, Front XLR5, Fully Isolated
9117
DMX Repeater Pro, 8-way, Rear RJ45 Ethercon, Fully Isolated
9118
DMX Repeater Pro, 8-way, Front RJ45 Ethercon, Fully Isolated
Accessories
9002
Wall mount kit
9003
Truss mount kit
- PRODUCT OVERVIEW SPECIFICATIONSAn intelligent opto-splitter that brings Ethernet-type features toplain DMX networks. RDM (Remote Device Management) supportallows the Repeater Pro to act as an RDM Controller, or as a proxy. In venues where a console is moved frequently, Hub Mode allowsthe Repeater Pro to sense which port is receiving DMX, the automatically route the signal to the remaining ports—eliminating theneed for patch bays. The Repeater Pro also allows for easy prioritization between twoconsoles, or HTP-merge two sources with one source able toroam—ideal for incorporating remote focus units. 85-250VAC 50/60 Hz wide-ranging power input Operating Conditions: -10 to +50°C, 5-95% relative humidity,non-condensing 0.75A power consumption 2500V opto-isolation between all ports 250V fault protection per portFEATURES Silent operation 8 outputs E1.20 RDM and E1.11 DMX512A compliant Three modes: RDM, Merge, and Hub RDM discovery and end device management from the frontpanel RDM can be disabled on a port-by-port basis to accommodateolder equipment Merge two controllers without any additional gear Automatically switch a console between locations by simplyunplugging and replugging the console Units running in different modes can be chained together Fully configurable from the front display DMX output speed and signal loss behavior are userselectable, including hold forever Monitor incoming DMX signal levels in real time DMX Console sends a channel level to all ports, for an independent DMX signal check on end devices Self-resetting over-voltage protection on all ports Racxk ears includedSTANDARDS COMPLIANCE ETL CE RoHS 2002/95/EC E1.20 RDM R2010—
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.