What\'s in the box
- Radio replacement/SWC interface module (for Chrysler/Dodge/Jeep)
- RP4-CHY11-A harness (13-pin to 10-pin connector + bare wires)
- RP4-CHY11-B Interface harness (15-pin to 10-pin connector + bare wires)
- 12\" Steering wheel control harness (4-pin connector to 3.5mm/blue wire)
- Instructions
About this item
PAC\'s RP4-CH11 wiring interface lets you replace the factory radio in select 2005-20Chrysler, Dodge, Jeep, Mitsubishi, Ram, and Volkswagen vehicles. You\'ll retain your factory steering wheel audio controls, your vehicle\'s entertainment system, and the use of your factory amplifier, if present.
Another plus — the RP4-CH11 interface eliminates the need for the secondary steering wheel control interface (SWI-CAN or SWI-CAN2) that\'s usually required for these Chrysler-built vehicles, saving you some more cash. Warranty: 1 year.
Important Note: If you have a factory amp in your vehicle, you\'ll lose the ability to fade from front to rear when you install a new car stereo. (See Details.) See Details for a list of compatible car stereos.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.