Optical Auto Lens Groover Slotted Machine 110V
The center slot, front arc slot, and rear arc slot for processing the edge of the half-rimless or rimless spectacle lens.
Product parameter:
Lens acceptable: mineral/plastic glasses Attainable depth of grooving: 0 -0.7mm Width of grooving: 0.6mm Acceptable thickness of lens: 1.5- 11mm Acceptable diameter of lens: 28-70mm Grooving time needed: About 60 seconds Weight: 6LBS (2.7KG) Electric Voltage: 110V Frequency: 60HZ Power: 30W Features:
1. Iron plating panel and strong corrosion resistance, Beautiful appearance.
2.The Angle can be adjusted, and the accuracy is higher.
3. Depth is adjustable in seven gears.
Precautions:
1.Don\'t use this machine for any other purposes than grooving lens of glasses.
2.While the machine is working ,don\'t touch the cutting wheel to avoid getting injured.
3.When the electric power cannot reach the intensity demanded (voltage and frequency), don\'t use the machine,you have to be clear about the particular condition of the power supply.
4.Don\'t place the machine in high temperature or leave it exposed to strong sunlight.
5.If any liquid or other material comes into the machine, turn the switch off immediately and pull the plug out of the wall socket It cannot be operated again until the machine is thoroughly checked and repaired by an expert in this line.
6.No other spare parts can be fitted in the machine than its own elements.
7.Don\'t make the machine over-loaded or ram any of its spare parts.
8.If the machine is left idle for a period of time please remove the plug out of thewall socket.
Item Number:
1* Optical Auto Lens Groover Slotted Machine 110V (239793)
On May 31, 2024 at 20:46:46 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.