|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Omron H3CR-F8 solid-state twin timer relay (8-pin round plug-in octal base)
$80.00

Omron H3CR Time Delay Relay Timer 100-240V AC DPDT 8-Pin 5A Panel MtTechnical Specifications - Brand & Series: Omron H3CR Series
- Model Configuration: H3CR-F8 (8-pin round plug-in octal base)
- Supply Voltage: 100 to 240V AC or 100 to 125V DC (50/60 Hz)
- Contact Output: DPDT (Double Pole Double Throw) rated at 5A / 250V AC
- Operational Mode: Flicker OFF start / Repeat cycle timer [1, 2, 3]
Understanding the Faceplate ControlUnlike single-dial timers, this unit lets you program repeating cyclic sequences: - Twin Concentric Dials: The outer ring controls the OFF time (indicated by the green LED zone/pointer), while the central inner dial sets the ON time (indicated by the red target pointer).
- Adjustable Units: The small rotary selectors in the upper-right (0.1s / OFF) and lower-right (0s / ON) corners change the active scale multipliers. It can scale across seconds, minutes, or hours (up to 30 or 300 hours depending on the exact subtype). [1, 2]
Wiring Diagram Overview (8-Pin Octal)The side-casing schematic maps out the internal circuitry for an 8-pin round socket: - Power Source (Pins 2 & 7): Supplies the 100–240V operating current to internal timer electronics.
- Relay Pole 1 (Pins 1, 3, 4): Pin 1 is the common feed. Pin 4 is Normally Closed (NC), and Pin 3 is Normally Open (NO).
- Relay Pole 2 (Pins 8, 5, 6): Pin 8 is the common feed. Pin 5 is Normally Closed (NC), and Pin 6 is Normally Open (NO)

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|