New Electronics Controller Control Module Panel DSE703 Replace For Deep Sea

Part number：DSE703Specifications
DC Supply: Continuous 8V to 35V
Crank Disconnect Function: It can sustain 0V for 50ms. The minimum working voltage before disconnection is 10V, and the system resumes operation when supply voltage recovers to 5V.
This function can work without an internal backup battery.
Current Draw: 50mA under operating condition, 10mA under standby condition.
AC Sensing Input Range: 75V (Neutral) to 277V (Neutral), 3-phase 4-wire AC (tolerance ±20%)
AC Sensing Frequency: 50-60Hz under rated engine speed (Minimum detectable signal: 75V AC Neutral)
(Crank disconnect will activate when neutral voltage drops to 15V)
Starter Output: 1.2A DC at supply rail voltage
Fuel Solenoid Output: 1.2A DC at supply rail voltage
Auxiliary Output: 1.2A DC at supply rail voltage
Overall Dimensions: 125 × 165 × 28 mm
Alternator Charge Fault / Excitation Monitoring Range: 0V to 35V
Operating Temperature Range: -30°C to 70°C
Protection Functions
1. Low Lube Oil Pressure Shutdown Protection
2. Alternator Charging Fault Protection
3. Generator Set Emergency Stop Function
4. High Coolant Temperature Shutdown Protection
5. Engine Overspeed Shutdown Protection
6. Engine Underspeed Shutdown Protection
7. Configurable Warning & Alarm Protection
Control Functions
1. Emergency Stop Control
2. Automatic Starter Motor Actuation Control
3. Pre-Heater Control
4. Pre-Fuel Supply Control
5. Energize-to-Stop Solenoid Control

On Sep-17-21 at 21:05:08 PDT, seller added the following information:

On Jul 19, 2026 at 21:05:08 PDT, seller added the following information:

On Jul 30, 2026 at 09:40:39 PDT, seller added the following information: