Nano Base Board (A) for Raspberry Pi Compute Module 5, Same Size As The CM5

Description
Nano Base Board (A) for Raspberry Pi Compute Module 5, Same Size As The CM5Nano Base Board (A) for CM5

Suitable For Evaluating The Raspberry Pi CM5 Or Being Integrated Into End Products

Base Board for Compute Module 5 Lite / eMMC


Same Size As The CM5

Compact size and fully functional, With Multiple Peripheral Interfaces, Suitable for Narrow Application Environments

Note: theCM5is NOT included. Please buy it separately.
SpecificationsCM5 socketsuitable for all variants of Compute Module 5ConnectorRaspberry Pi 40PIN GPIO interface × 1USBUSB 3.2 Gen1 Type A port × 1MIPIMIPI 4-lane interface × 2 (22pin 0.5mm FPC connector)StorageTF card socket for Compute Module 5 Lite (without eMMC) variantsPower input5VDimensions55 × 40mm
What\'s On Board

1. CM5 socket
   suitable for all variants of Compute Module 5
2. USB port
   USB 3.2 Gen1 high speed interface, for connecting sorts of USB devices
3. TF card slot
   for connecting a TF card with pre-burnt image (Lite variant ONLY)
4. Power supply / Programming
   5V power supply, or used for eMMC burning
5. FAN header
   4PIN JST-SH PWM fan header for connecting a cooling fan
6. PSW button
   power button
7. BOOT button
   Press before powering on and release after powering on to enter the burning mode

1. 2PIN JST-SH RTC battery header
2. 40PIN GPIO interface
   suitable for connecting to various HAT modules
3. Dual MIPI interfaces
   for connecting to DSI displays or CSI cameras
4. Special function pins
   CM5 core power enable and ETH SYNC signal
5. IO-VREF selection
   CM5 IO logic level: 3.3V or 1.8V
6. Function enable pins
   Enabled by default, can be disabled by shorting the corresponding pads
7. Dual-color LED indicator
   Red light: Raspberry Pi power indicator
   Green light: Raspberry Pi working status indicator

Outline dimensions
About Compute Module 5Newly upgraded, more powerful

• Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance
• More options for RAM (2GB / 4GB / 8GB / 16GB)
• More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
• Faster eMMC Flash storage, up to 200 Mbps data rate
• Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications
• Adopts B to B connectors, most compatible with Compute Module 4
• Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications
• Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules

Resources & Services

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Package Content

Weight:0.015 kg

1. CM5-NANO-A x1
2. 2*20PIN color-coded straight pinheader x1

12What\'s the differencesCM5 Base BoardInterface count and specificationsPoEGigabit
ETH40PIN
GPIOPCIeUSB①MIPIHDMIRTCFan
Header②Power
InputFeatures
NANO A√3.0×1×2SH1.0√5VCM5 sized
NANO B×1√16PIN PCIe3.0×1×2√SH1.0√5VCM5 sized
mini Base A×1√16PIN PCIe3.0×2
2.0×2×2×2ML/CR1220√5Vmini size
PoE Base√×1√M.2 M3.0×2
Raspberry Pi official③×1√M.2 M3.0×2×2×2ML/CR1220√5VOfficial IO base boardNote① USB 3.0 is equivalent to USB 3.2 Gen1.
② Unless otherwise specified, the Fan header usually is JST-SH type connector.
③ There\'s PoE header only on the Raspberry Pi official IO board without PoE circuit, which means additional PoE module is required for the official IO board to enable PoE feature.
Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A).