SPECIFICATIONS
Brand Name: NONE
Choice: yes
Condition: New
High-concerned chemical: none
Origin: Mainland China
Type: Module
p{margin-block-start: 0; margin-block-end: 0}
🚀 Instant Audio Playback Solution!
Add professional voice and sound effects to any project! This DFPlayer Mini module is a complete MP3 decoder board that plays audio directly from a TF card or U disk – perfect for adding voice prompts, alarms, and automated announcements to your Arduino, ESP32, or DIY creations.
✨ Key Advantages:
🔌 Plug & Play – Simply insert a prepared TF card, connect a speaker, and power up for instant sound.
🎛️ Multiple Control Modes – Supports UART serial commands, physical push buttons, or AD key input for flexible integration.
🎵 High-Quality Sound – Features a 24-bit DAC with an 85dB signal-to-noise ratio for clear and crisp audio.
💾 Wide Compatibility – Supports FAT32 file system (exFAT/NTFS are not supported), with storage up to 32GB on TF cards or USB drives.
⚡ Flexible Power – Works seamlessly with both 3.3V and 5V microcontroller systems.
⚠️ [CRITICAL] Read This Before You Start - Avoid Common Pitfalls!
❌ THIS IS NOT A SIMPLE USB SPEAKER!
This is a serial-controlled decoder module. You MUST format your storage device and name files exactly as specified below for it to work. Following these steps is essential.
📁 【TF Card / USB Stick Setup - THE MOST IMPORTANT STEP!】
🔌 【Power & Connection Warnings】
Operating Voltage: Strictly 3.3V to 5V DC. Applying voltage above 5V will permanently destroy the module.
For ESP32/ESP8266 Users: Always power the module from the microcontroller’s 3.3V pin, NOT the 5V pin.
Speaker Compatibility: Can directly drive 4Ω or 8Ω speakers. Connect to an external amplifier for higher volume.
🎛️ 【Troubleshooting: If It Doesn‘t Work, Check This First!】
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.