Why Choose BT-250K Oscilloscope Handheld ?
The BT-250K Pocket Oscilloscopes with compact handheld design provides a simple and portable solution for electronics repair and education. With 250 kHz bandwidth and 2.5 MSa/s real-time sampling, it is ideal for observing common low-frequency analog and digital signals without the complexity of bench oscilloscopes. It supports AUTO, Normal, and Single trigger modes for stable waveform capture, even for beginners, and features a clear 2.8-inch 320×240 LCD with adjustable voltage sensitivity and timebase. Compatible with X1/X10 probes, it measures up to ±40 V (X1) or ±400 V (X10, probe dependent). A built-in 1 kHz calibration signal and a 400 mAh rechargeable battery delivering up to 3 hours of portable use make it a practical choice for everyday signal testing.
Technical parameters:
- Sampling rate: 2.5 MSa/s
- Bandwidth: 250 kHz
- Vertical sensitivity: 10 mV/Div - 10 V/Div (Proceed in a 1-2-5 sequence)
- Time base range: 10 us/Div - 50 s/Div (Proceed in a 1-2-5 sequence)
- Voltage range: X1: ±40V (Vpp: 80V)
- Calibration square wave: Frequency: 1 kHz
- Trigger mode: Auto/Normal/Single
- Coupling mode: AC/DC
- Duty cycle: 50%
- Display: 2.8-inch, 320 x 240 pixels
- USB charging: 5V/1A
- Lithium battery capacity: 400 mAh
- Size: 103 x 73 x 25 mm
- Weight: 100 g
Package list:
- 1x Pocket Oscilloscopes BT-250K
- 1x BNC Probe
- 1x Type-C Cable
- 1x Storage Bag
- 1x User Manual
✅Mini Handheld Oscilloscope for Basic Signal Testing - Compact digital Scope designed for electronics repair and education. Features 250 kHz bandwidth and 2.5 MSa/s real-time sampling rate for observing common low-frequency analog and digital signals.
✅One-Touch AUTO Setup with 3 Trigger Modes - Supports AUTO, Normal, and Single trigger modes with selectable rising or falling edge. One-button AUTO setup quickly adjusts timebase and voltage scale for clear waveform display, ideal for beginners and everyday testing.
✅Clear 2.8\" LCD and Simple Controls - Lab Oscilloscopes Equipped with a 2.8-inch 320×240 LCD screen for easy waveform viewing. Intuitive side switches allow quick adjustment of vertical sensitivity, timebase, coupling mode, and trigger position.
✅Voltage Measurement - Supports ±40 V input in X1 mode or up to ±400 V in X10 mode (probe dependent). The handheld oscilloscope features a built-in 1 kHz calibration signal to help verify probe compensation and basic measurement accuracy.
✅Pocket-Size Design with Rechargeable Battery – Lightweight handheld size (103 × 73 × 25 mm, approx. 100 g) fits easily into toolkits. The AUTO trigger oscilloscope built-in 400 mAh lithium battery provides up to 3 hours of portable operation for field or classroom use.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.