New GT972I is unique among gold prospecting metal detectors for its combination of high sensitivity to small goldnuggets and its versatile function as an all purpose treasure detector. The controls and features are tailored to gold prospecting, including a sophisticated ground balancing system, separatecontrol over signal gain and threshold,and aunique discrimination control system. These features also make for agreatrelichunting detector. While the GT972I makes fora highly competentcoin-shootingdetector,its user interface and featuresare not specifically designed for this purpose.
Device Specifications
After detecting a target, do the following:
1. Walk around the target in a circle.
2.While circling the target, continue sweeping the search coil across the target.
3.Sweep once every 30° or 40° of the circle.
If the tone does not change and the Target-ID value is consistent as you circle the target, you can be highly confident ofthe target’s identification.
If the tone or Target-ID changes as you circle the target, you may have multiple targets or an irregularly shaped object.
If the tone completely disappears at different angles, the target may be trash or a low- value metal.
If you are new to the hobby, dig all targets. With practice in the field, you will soon be able to correlate audible and visual target response with certain types of metal objects.
Pinpointing in Discrimination Mode:
1. Sweep over target in narrowing side-to-side pattern.
2. Take visual note of spot on ground where “beep” occurs.
3. Step 90° to the side of the target.
4. Sweep search coil over same area, at 90° to 1st sweep pattern.
5. This pinpoints the target location with an “X.”
TARGET PINPOINTING
After you have identified a target using Discrimination Mode, press-and-hold the PINPOINT button to identify the target’s exact location. This technique can yield more information about the target’s shape and size and also find its exact location to facilitate extraction.Pinpoint as follows:
1. Position the search coil just barely off the ground, and to the side of the target.
2. Now move the search coil slowly across the target; you can locate it by the sound. The target is located directly under where the sound is loudest.
NOTE:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.