Leeb Hardness Gauge with Data Storage Function Display Repeatability 0.8%
1.Overview:
This instrument is a portable measuring instrument, it can quickly, lossless, high accuracy of the hardness of common metal materials measurement. It can be used in both laboratory and engineering sites. Through the instrument measurement condition setting, it can meet a variety of measurement demands. This instrument can be used in manufacturing, metal processing industry, chemical industry, commodity inspection and other testing fields. It is a necessary instrument for non-destructive hardness testing of materials. The instrument meets the following standards:
——《JJG 747-1999 Leeb Hardness Tester》
——《ASTM A956-06Standard Test Method for Leeb Hardness Testing of Steel Products》
2.Feature:
1.The instrument has a delicate appearance, is easy to use, and is convenient to carry.
2.High brightness LCD display, clear display even under direct sunlight, with backlight function suitable for various lighting conditions.
3.Accurate measurement, high-precision measurement circuit ensures an indication error of ± 6% (HLD=800), and indication repeatability of 0.8%.
4.Support multiple hardness class=\"MsoNormal\">5.Automatic calculation, capable of automatically calculating the average hardness value.
6.The hardness system supports \"forged steel\" materials. When using a D-type impact device to test \"forged steel\" specimens, the HB value can be directly read without the need for manual table lookup.
7.Type-C charging port, compatible with most digital product interfaces such as mobile phones.
8.Data saving function, convenient for recording and checking.
9.Automatic shutdown function in 10 minute.
3.Technical parameters:
Measurement direction: support 360º(vertical down, oblique down, horizontal, oblique up, vertical up)
(59.1-88)HRA, (13.5-101.7)HRB
Hardness standard
Error Value:±6%(HLD=800)
Indication Repeatability:0.8%(HLD=800)
Display: Industrial grade 128 × 64 dot matrix LCD liquid crystal display
Power supply: rechargeable lithium battery
Continuous working time: about 20 hours
Operating conditions: operating temperature -10-50℃; Storage temperature: -30℃-60℃; Relative humidity ≤ 90%;
Applicable materials: steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel
Main application areas:
Bearings and other components;
Failure analysis of pressure vessels, turbine generator sets, and equipment;
Heavy duty workpieces;
Installed mechanical or permanently assembled components;
Workpieces with limited experimental space;
Require formal original records of test results;
Material differentiation in metal material warehouses;
Rapid inspection of multiple measurement points on large workpieces;
1. Applicable measurement range:
Material
Hardness system
Impact device
D
DL
Steel and cast steel
HRC
17.9~68.5
20.6~68.2
HRB
59.6~99.6
37.0~99.9
HRA
59.1~85.8
HB
127~651
81~646
HV
83~976
80~950
HS
32.2~99.5
30.6~96.8
Steel
HB
143~650
CWT、ST
HRC
20.4~67.1
HV
80~898
Stainless steel
HRB
46.5~101.7
HB
85~655
HV
85~802
GC. IRON
HRC
HB
93~334
HV
NC、IRON
HRC
HB
131~387
HV
C.ALUM
HB
19~164
HRB
23.8~84.6
BRASS
HB
40~173
HRB
13.5~95.3
BRONZE
HB
60~290
COPPER
HB
45~315
2. Parameters of impact device::
Impact Device
D/DL
Impact energy
Impact body weight
11mJ
5.5g/7.2g
Ball head hardness:
Ball head diameter:
Ball head materials:
1600HV
3mm
Tungsten caroffere
Impact device diameter:
Impact device length:
Impact device weight:
20mm
86(147)/ 75mm
50g
Maximum hardness of specimen
940HV
Average surface roughness of specimens Ra:
1.6μm
Minimum weight of specimen:
Measured directly
Stable support required
Compact coupling is required
>5kg
2~5kg
0.05~2kg
Minimum thickness of specimen
Compact coupling is required
Minimum depth of hardened layer
5mm
≥0.8mm
Ball head indentation size
Hardness 300 hv
Indentation diameter
Indentation depth
0.54mm
24μm
Hardness 600 hv
Indentation diameter
Indentation depth
0.54mm
17μm
Hardness 800 hv
Indentation diameter
Indentation depth
0.35mm
10μm
Scope of application of impact device
DL models measure slender narrow grooves or holes;
Type D used for routine measurements
4.List of product packaging accessories(If you require a DL probe, please contact us. Thank you.)
Name
QTY
Product
1 PC
D-type impact device
1 SET
Small support ring
1PC
Pipe brush
1PC
Charging line
1PC
Charger
1 PC
Certificate & Warranty Card
1 SET
Manual
1PC
Desiccant
1 PC
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.