Laser Engraver Accessories – Compatible with Xtool F2
- SUPPORT YOUR FILTER — Loose filter material needs a place in your exhaust setup, not a spot balanced against your laser engraver. This pre-filter holder keeps that material in the airflow path, giving you a place for a replaceable filtering layer at your engraving bench while you prepare your machine for the next personalized sign, marked tag, or creative project.
- CHOOSE MAGNETIC RETENTION — The holder accommodates four 10x3 magnets, giving you a magnetic attachment option for your laser engraver\'s exhaust setup when you want to use magnets at your workbench.
- SNUG WITHOUT MAGNETS — Fit the holder to your laser engraver even when you have not bought magnets for the job: it fits snugly without them. For a workspace where you prefer to keep hardware purchases to what you actually need, that gives you a choice between fitting the holder without magnets and adding magnetic retention, rather than making magnets the starting point for your setup.
- THIN FILTER SUPPORT — Choose thin filter material for your laser engraver\'s exhaust path, with a holder made to keep that layer in place as air passes through it. The filter material catches impurities as air moves through your setup, giving you a filtering layer to use during engraving projects and a separate holder to keep using when you change that material.
- SIZE YOUR FILTER MATERIAL — Cut a thin piece of filter material to fit the holder, so the piece you prepare matches the space where it will sit in your exhaust setup. At your project table, that gives you a straightforward way to prepare your filtering layer before returning to your laser engraver, and to size a fresh piece when it is time to change that layer. WHAT\'S IN THE BOX — Only the item named in the title. No hardware is included (see the description).
Loose filter material needs something to hold it in your exhaust airflow. You want a filtering layer at your laser engraver, not another loose piece to work around at the bench.
This pre-filter holder is the plastic part that gives thin filter material a place in your engraver\'s exhaust setup. It holds the material in position while air passes through it. The filter material catches impurities; the holder keeps that material in place. Together, they give you a replaceable filtering layer for your engraving workspace, with a holder you keep using when the filter material changes.
Use a thin piece of filter material cut to fit the holder. Sizing the material for the holder gives it the support it needs in the exhaust path rather than leaving it unsupported. When you change the filtering layer, prepare another thin piece to fit the same holder. Choose your filter material with that thin format in mind, then cut the material—not the plastic part—to fit.
For attachment, the holder accommodates four 10x3 magnets for magnetic retention. It also fits snugly without magnets, so magnetic attachment is a choice rather than a requirement for that fit. Whether you prefer fitting it without magnets or adding them to your setup, the holder\'s job stays the same: keeping your filter material in the exhaust airflow.
For your workshop or dedicated engraving space, this accessory gives pre-filter material a home alongside the machine you use for your projects. As you prepare a filtering layer or change an old piece, you have a holder built around thin, cut-to-fit material.
HARDWARE NOT INCLUDED: Only the item named in the title is in the box. Every setup is different: depending on yours, mounting it or attaching it to an existing part may use hardware you already have, such as the original screws, or you may need to buy your own screws, bolts, tape or adhesive to suit your situation. No hardware of any kind is included with this listing.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.